Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO 340W BK ASAHI JAPAN
XYRON™
Automotive interior parts,Industrial machinery
High temperature resistan,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 100 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 94.0 °C | |
| Linear coefficient of thermal expansion | MD:-30to65°C | ISO 11359-2 | 7.5E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 2270 Mpa |
| bending strength | 23°C | ISO 178 | 72.0 Mpa |
| Nominal tensile fracture strain | 23°C | ISO 527-2 | 21 % |
| tensile strength | Yield,23°C | ISO 527-2 | 44.0 Mpa |
| Electrical performance | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| Dielectric constant | 1MHz | IEC 60250 | 2.90 |
| 100Hz | IEC 60250 | 2.90 | |
| Dielectric strength | 2.00mm | IEC 60243-1 | 29 KV/mm |
| Dissipation factor | 1MHz | IEC 60250 | 4E-03 |
| 100Hz | IEC 60250 | 3E-03 | |
| Surface resistivity | IEC 60093 | 1E+16 ohms | |
| Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| Shrinkage rate | 2.00mm | Internal Method | 0.50-0.70 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.10 % |
| impact performance | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 15 kJ/m² |
| flammability | Test Condition | Test Method | ASAHI JAPAN/340W BK |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |