Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PUR，Unspecified EN-2552 ELANTAS PDG Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| Curing Procedure | LapShear-AdhesiontoAluminum | 2.07 MPa | |
| 80°C | 0.7 day | ||
| 25°C | 7.0 day |
| hardness | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| Shore hardness | 邵氏D | 90 |
| Electrical performance | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| Volume resistivity | 25°C | 6.8E+13 ohms·cm | |
| Surface Resistivity | 2.8E+17 ohms | ||
| dielectric constant | 25°C,1kHz | 3.99 | |
| Dissipation Factor | 耐电弧性 | >120 sec | |
| InsulationResistance(25°C) | 8.6E+12 ohms | ||
| 25°C,100Hz | 0.18 | ||
| 25°C,1kHz | 0.053 | ||
| dielectric strength | 23 kV/mm |
| Mechanical properties | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| tensile strength | 7.07 MPa | ||
| elongation | 断裂 | 39 % |
| thermosetting | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| Thermosetting mixed viscosity | 25°C4 | 4500 cP | |
| 25°C5 | 8500 cP | ||
| GelTime-100gmmass(25°C) | 12.0to15.0 min | ||
| Thermosetting components | 树脂 | 按重量计算的混合比:17 | |
| Thermosetting mixed viscosity | 25°C3 | 300 cP |
| Cured Properties | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| Shrinkage rate | 0.75 % |
| flammability | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| UL flame retardant rating | 6.4mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| density | --3 | 1.24 g/cm³ | |
| Water absorption rate | 24hourimmersion:25°C | 0.060 % | |
| 7dayimmersion:25°C | 0.15 % | ||
| density | --4 | 1.46 g/cm³ | |
| --5 | 1.48 g/cm³ |
| elastomer | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| tear strength | 27.0 kN/m |
| Thermal performance | Test Condition | Test Method | ELANTAS PDG Inc./EN-2552 |
|---|---|---|---|
| thermal conductivity | 0.65 W/m/K | ||
| Linear coefficient of thermal expansion | MD | 1.2E-04 cm/cm/°C |
Contact Us
Get App
Top