Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Polifor® 5003/V2 NATURALE SO.F.TER ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 35 J/m |
| 0°C | ASTM D256 | 26 J/m |
| Mechanical properties | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 40 % |
| Flexural modulus | ASTM D790 | 1400 MPa | |
| tensile strength | 屈服 | ASTM D638 | 30.0 MPa |
| Electrical performance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| needle flame test | IEC 60695-11-5 | Pass |
| flammability | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C | |
| UL flame retardant rating | 3.2mm | UL 94 | V-2 |
| 1.6mm | UL 94 | V-2 | |
| Limiting Oxygen Index | ASTM D2863 | 27 % |
| physical property | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 1.8 % | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 12 g/10min |
| density | ASTM D792 | 0.920 g/cm³ |
| Thermal performance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 5003/V2 NATURALE |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 55.0 °C |
| ball-indentation hardness | 125°C | IEC 335 | Pass |
| vicat | ASTM D15252 | 93.0 °C |
Contact Us
Get App
Top