Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS PC-345KZ ZHENJIANG CHIMEI
WONDERLOY®
Automotive sector、Electronic field、Electrical field、currency
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 105 °C |
| Vicat Softening Temperature | -- | ISO306/B50 | 110 °C |
| Linear thermal expansion coefficient | MD：23到55°C | ISO11359-2 | 8.5E-06 cm/cm/°C |
| Vicat Softening Temperature | -- | ASTMD152511 | 110 °C |
| Heat Deflection Temperature | 1.8MPa,未退火,3.20mm | ASTMD648 | 95.0 °C |
| Vicat Softening Temperature | -- | ISO306/A50 | 125 °C |
| ASTMD152510 | 125 °C | ||
| Linear thermal expansion coefficient | MD：-40到40°C | ASTME831 | 8.5E-06 cm/cm/°C |
| Heat Deflection Temperature | 1.8MPa,Unannealed,4.00mm | ISO75-2/A | 93.0 °C |
| Hardness | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Rockwell Hardness | R计秤,23°C | ISO2039-2 | 108 |
| ASTMD785 | 108 |
| Physical | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Melt Mass-Flow Rate | 260°C/5.0kg | ISO1133 | 18 g/10min |
| 内部方法 | 33.0 CM | ||
| Modeling Shrinkage | ISO2577 | 0.40to0.60 % | |
| Melt Mass-Flow Rate | 260°C/5.0kg | ASTMD1238 | 17 g/10min |
| Modeling Shrinkage | MD | ASTMD955 | 0.40to0.60 % |
| Mechanical Properties | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Flexural Modulus | ISO178 | 2100 Mpa | |
| Flexural Strength | 23°C | ASTMD790 | 73.5 Mpa |
| Tensile Stress | 断裂 | ISO527-2/50 | 42.0 Mpa |
| 屈服 | 50.0 Mpa | ||
| Tensile Strain | Break,23°C | ASTMD638 | 85 % |
| Flexural Modulus | 23°C | ASTMD790 | 2260 Mpa |
| Tensile Strength | Yield,23°C | ASTMD638 | 49.0 Mpa |
| Tensile Strain | 断裂 | ISO527-2/50 | 100 % |
| Flexural Stress | ISO178 | 75.0 Mpa |
| Impact Properties | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Notched Izod Impact Strength | -30°C | ISO180 | 40 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179 | 45 kJ/m² |
| Notched Izod Impact Strength | ISO180 | 45 kJ/m² | |
| Charpy Notched Impact Strength | -30°C | ISO179 | 40 kJ/m² |
| Flammability | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Flame Rating | 1.5mm | UL94 | HB |
| Electrical Properties | Test Condition | Test Method | ZHENJIANG CHIMEI/PC-345KZ |
|---|---|---|---|
| Volume Resistivity | IEC60093 | 1E+18 ohms·cm | |
| Surface Resistivity | 1E+16 ohms | ||
| Dielectric Constant | 1MHz | IEC60250 | 3.10 |
Contact Us
Get App
Top