Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS EMERGE™ ABS 5302 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/EMERGE™ ABS 5302 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm,注塑 | ASTM D256 | 72 J/m |
| Mechanical properties | Test Condition | Test Method | Trinseo/EMERGE™ ABS 5302 |
|---|---|---|---|
| elongation | 断裂,3.20mm,注塑 | ASTM D638 | 2.0 % |
| 屈服,3.20mm,注塑 | ASTM D638 | 2.0 % | |
| tensile strength | 断裂,3.20mm,注塑 | ASTM D638 | 70.0 MPa |
| bending strength | 3.20mm,注塑 | ASTM D790 | 114 MPa |
| tensile strength | 屈服,3.20mm,注塑 | ASTM D638 | 70.0 MPa |
| Flexural modulus | 3.20mm,注塑 | ASTM D790 | 6350 MPa |
| flammability | Test Condition | Test Method | Trinseo/EMERGE™ ABS 5302 |
|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Trinseo/EMERGE™ ABS 5302 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.15to0.25 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 1.6 g/10min |
| density | ASTM D792 | 1.19 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 0.35to0.40 % |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 5.0 g/10min |
| Thermal performance | Test Condition | Test Method | Trinseo/EMERGE™ ABS 5302 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 100 °C |
| Linear coefficient of thermal expansion | MD:-30到29°C | ASTM D696 | 9E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 105 °C |
| Linear coefficient of thermal expansion | TD:-30到29°C | ASTM D696 | 9.4E-05 cm/cm/°C |
| vicat | -- | ASTM D15253 | 115 °C |
| -- | ASTM D15254 | 106 °C |
Contact Us
Get App
Top