Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

TPV 201-87 CELANESE USA

Santoprene™

Electrical applications,Automotive Applications,household electrical appliances,Home appliance components,Parts under the hood of a car,Pipe fittings,Electrical components,Application in the automotive field,diaphragm,Movable hinge,Consumer product application field

Chemical resistance,High temperature resistan

Plastic Datasheets

hardness	Test Condition	Test Method	CELANESE USA/201-87
Shore hardness	ShoreA,15Sec,23°C	ISO 868	93

thermal performance	Test Condition	Test Method	CELANESE USA/201-87
Brittle temperature		ISO 812	-54.0 °C
Brittle temperature			ASTM D746	-54.0 °C
RTI Elec		UL 746	100 °C
RTI Str	1.0mm	UL 746	90.0 °C
		3.0mm	UL 746	95.0 °C
		1.5mm	UL 746	90.0 °C

Electrical performance	Test Condition	Test Method	CELANESE USA/201-87
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
Dielectric constant	23°C,1.98mm	ASTM D150	2.40
Dielectric constant		23°C,1.98mm	IEC 60250	2.40
Dielectric strength	23°C,2.00mm	ASTM D149	32 KV/mm
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	PLC	UL 746
High voltage arc tracing rate		HVTR	UL 746	PLC 1
Hot wire ignition	1.0mm	UL 746	PLC 4
		3.0mm	UL 746	PLC 2
		1.5mm	UL 746	PLC 3

Physical properties	Test Condition	Test Method	CELANESE USA/201-87
Resistance to cleaning agents		ISO 188	f4
Resistance to cleaning agents			UL 749	f3

flammability	Test Condition	Test Method	CELANESE USA/201-87
UL flame retardant rating	3.0mm	UL 94	HB
		1.0mm	UL 94	HB
		1.5mm	UL 94	HB

elastomer	Test Condition	Test Method	CELANESE USA/201-87
elongation	Break,23°C，Across Flow	ISO 37	580 %
elongation		Break,23°C，Across Flow	ASTM D412	580 %
Permanent compression deformation	70°C,22hr	ISO 815	36 %
		125°C,70hr	ISO 815	44 %
		70°C,22hr	ASTM D395B	36 %
		125°C,70hr	ASTM D395B	44 %
tear strength	23°C，横向Flow	ASTM D624	54.0 kN/m
tear strength		23°C，Across Flow (Across Flow)	ISO 34-1	54 kN/m
tensile strength	Break,23°C	ISO 37	15.0 Mpa
tensile strength		Break,23°C，横向Flow	ASTM D412	15.0 Mpa
Tensile stress	100%Strain,23°C，横向Flow	ASTM D412	7.10 Mpa
Tensile stress		100%Strain,23°C，横向Flow	ISO 37	7.10 Mpa

aging	Test Condition	Test Method	CELANESE USA/201-87
Change rate of tensile strength in air	125°C,70hr,inIRM903Oil	ASTM D471	-29 %
		150°C,168hr	ASTM D573	-15 %
		150°C,168hr	ISO 188	-15 %
Change rate of ultimate elongation in air	150°C,168hr	ASTM D573	-16 %
Change rate of ultimate elongation in air		125°C,70hr,inIRM903Oil	ISO 1817	-32 %
Elongation at Break	125°C,70hr,inIRM903Oil	ASTM D471	-32 %
Hardness change rate in the air	ShoreA,150°C,168hr	ASTM D573	2.0
Shore hardness	ShoreA,150°C,168hr	ISO 188	2.0
Tensile strain change rate	125°C,70hr,inIRM903Oil	ISO 1817	-29 %
Volume change	125°C,70hr,在IRM903油中	ISO 1817	48 %
Volume change		125°C,70hr,在IRM903油中	ASTM D471	48 %

Get App

Top