plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM TR-5-CF2001 JAPAN POLYPLASTIC
DURACON®
Automotive Applications,Fitness equipment
High impact resistance,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
ColourNumberCF2001/CD3101
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
Rockwell hardnessM-ScaleISO 2039-280
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A108 °C
Linear coefficient of thermal expansionMD：23to55°CInternal Method1.1E-04 cm/cm/°C
TD：23to55°CInternal Method1.1E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
Bending modulusISO 1783000 Mpa
bending strengthISO 17890.0 Mpa
Friction coefficientDynamic2JISK72180.36
Steel - Dynamic3JISK72180.54
Tensile modulusISO 527-23200 Mpa
Tensile strainBreakISO 527-210 %
tensile strengthISO 527-262.0 Mpa
Wear factor0.060MPa,0.15m/sec5JISK7218600 10^-8mm³/N·m
0.49MPa,0.30m/sec4JISK721810 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72187000 10^-8mm³/N·m
0.49MPa,0.30m/sec6JISK72181000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
Dielectric strength3.00mmIEC 60243-120 KV/mm
Surface resistivityIEC 600932E+15 ohms
Volume resistivityIEC 600932E+14 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
melt mass-flow rate190°C/2.16kgISO 11338.0 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11337.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.7 %
MD:2.00mmISO 294-42.0 %
Water absorption rate23°C,24hrISO 620.60 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/TR-5-CF2001
UL flame retardant ratingUL 94HB

Contact Us

Get App

Top