Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO(PPE)+PS Iupiace® AH40 Mitsubishi Chemical Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179 | 17 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 150 kJ/m² |
Electrical performance | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
dielectric strength | 3.00mm | IEC 60243-1 | 20 kV/mm |
Volume resistivity | IEC 60093 | 3E+16 ohms·cm | |
dielectric strength | 1.00mm | IEC 60243-1 | 38 kV/mm |
Surface Resistivity | IEC 60093 | 2E+15 ohms |
Mechanical properties | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
Flexural modulus | 23°C | ISO 178 | 2500 MPa |
Tensile modulus | 23°C | ISO 527-2 | 2500 MPa |
tensile strength | 屈服,23°C | ISO 527-2 | 43.0 MPa |
Tensile strain | 屈服,23°C | ISO 527-2 | 3.2 % |
Nominal tensile fracture strain | 23°C | ISO 527-2 | 34 % |
bending strength | 23°C | ISO 178 | 76.0 MPa |
flammability | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
UL flame retardant rating | 0.75mm | UL 94 | HB |
physical property | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
Shrinkage rate | TD:3.20mm | 0.50to0.70 % | |
MD:3.20mm | 0.50to0.70 % | ||
Water absorption rate | 饱和,23°C | ISO 62 | 0.070 % |
density | ISO 1183 | 1.06 g/cm³ | |
Melt volume flow rate | 300°C/2.16kg | ISO 1133 | 17.0 cm³/10min |
Thermal performance | Test Condition | Test Method | Mitsubishi Chemical Corporation/Iupiace® AH40 |
---|---|---|---|
Heat distortion temperature | 0.45MPa,未退火,HDT | ISO 75-2/B | 110 °C |
1.8MPa,未退火,HDT | ISO 75-2/A | 95.0 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6.7E-05 cm/cm/°C |
TD | ISO 11359-2 | 7.1E-05 cm/cm/°C |
Contact Us
Get App
Top