Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 351-15 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTrinseo/351-15
Charpy Notched Impact Strength23°CISO 17970 kJ/m²
Impact strength of cantilever beam gap23°CASTM D256840 J/m
hardnessTest ConditionTest MethodTrinseo/351-15
Rockwell hardnessR级ASTM D785118
Mechanical propertiesTest ConditionTest MethodTrinseo/351-15
bending strength--ASTM D79089.0 MPa
tensile strength --ASTM D63862.0 MPa
--ISO 527-260.0 MPa
elongation断裂ASTM D638130 %
Tensile modulusISO 527-22300 MPa
Flexural modulus--ISO 1782300 MPa
bending strength--ISO 17885.0 MPa
Flexural modulus--ASTM D7902200 MPa
elongation断裂ISO 527-2110 %
Electrical performanceTest ConditionTest MethodTrinseo/351-15
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 2
dielectric strengthASTM D14920 kV/mm
Volume resistivityIEC 600933E+16 ohms·cm
Surface ResistivityIEC 60093>1.0E+15 ohms
arc resistanceASTM D495110 sec
optical performance Test ConditionTest MethodTrinseo/351-15
transmissivityASTM D100389.0 %
refractive indexASTM D5421.585
physical property Test ConditionTest MethodTrinseo/351-15
Shrinkage rateMDASTM D9550.50to0.70 %
Water absorption rate23°C,24hrISO 620.20 %
Melt volume flow rate300°C/1.2kgISO 113315.0 cm³/10min
Shrinkage rateTDASTM D9550.50to0.70 %
densityISO 11831.20 g/cm³
Thermal performanceTest ConditionTest MethodTrinseo/351-15
Heat distortion temperature1.8MPa,未退火，HDTASTM D648134 °C
Linear coefficient of thermal expansionTDASTM D6967E-05 cm/cm/°C
Heat distortion temperature0.45MPa,未退火，HDTASTM D648140 °C
1.8MPa,未退火，HDTISO 75-2/A126 °C
Linear coefficient of thermal expansionMDASTM D6967E-05 cm/cm/°C

Contact Us

Get App

Top