Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POK M730A HYOSUNG KOREA
POKETONE™
Electronic appliances,Automotive sector
Bottom flow,high viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 105 |
| thermal performance | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 105 °C |
| 0.45MPa,Unannealed | ASTM D648 | 210 °C | |
| Melting temperature | ASTM D1525 | 220 °C |
| mechanical properties | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| Bending modulus | 23°C | ASTM D790 | 1420 Mpa |
| bending strength | 23°C | ASTM D790 | 58.8 Mpa |
| elongation | Break,23°C | ASTM D638 | >300 % |
| tensile strength | 23°C | ASTM D638 | 58.8 Mpa |
| Electrical performance | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| Dielectric strength | ASTM D149 | 17 KV/mm | |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| melt mass-flow rate | 255°C/2.16kg | ASTM D1238 | 3.0 g/10min |
| Shrinkage rate | MD | ASTM D955 | 1.8-2.0 % |
| Water absorption rate | Equilibrium,23°C,60%RH | ASTM D570 | 0.45 % |
| flammability | Test Condition | Test Method | HYOSUNG KOREA/M730A |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |