Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ASA RAMLLOY PFS301G6 POLYRAM ISRAEL
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 170 °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 205 °C | |
| 1.8MPa,Unannealed | ISO 75-2/A | 170 °C | |
| 0.45MPa,Unannealed | ASTM D648 | 206 °C | |
| Melting temperature | ASTM D3418 | 220 °C | |
| ISO 11357-3 | 220 °C |
| mechanical properties | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 7000 MPa | |
| ISO 178 | 7000 MPa | ||
| bending strength | ISO 178 | 190 MPa | |
| ASTM D790 | 190 MPa | ||
| elongation | Break | ASTM D638 | 3.0 % |
| Tensile modulus | ISO 527-2 | 9800 MPa | |
| ASTM D638 | 9800 MPa | ||
| Tensile strain | Break | ISO 527-2 | 3.0 % |
| tensile strength | Yield | ISO 527-2 | 130 MPa |
| Yield | ASTM D638 | 130 MPa |
| Electrical performance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Dielectric constant | 1MHz | IEC 60250 | 3.70 |
| Physical properties | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| density | ISO 1183 | 1.48 g/cm³ | |
| ASTM D792 | 1.48 g/cm³ | ||
| melt mass-flow rate | 275°C/2.16kg | ASTM D1238 | 15 g/10min |
| 275°C/2.16kg | ISO 1133 | 15 g/10min | |
| Shrinkage rate | ISO 2577 | 0.16 % | |
| MD | ASTM D955 | 0.16 % |
| impact performance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 10 kJ/m² |
| 23°C | ASTM D256 | 85 J/m |
| flammability | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |