Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 7022IRF MITSUBISHI ENGINEERING JAPAN
IUPILON™
--
Low viscosity、Easy to demould
FDA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IRF |
|---|---|---|---|
| Flexural modulus | 23℃ | ASTM D-790 | 2.3 GPa |
| bending strength | 23℃ | ASTM D-790 | 88.2 Mpa |
| tensile strength | 23℃ | ASTM D-638 | 60.8 Mpa |
| elongation | 23℃ | ASTM D-638 | 110 % |
| Rockwell hardness | ASTM D-785 | R120 | |
| Impact strength of cantilever beam gap | 3.2mm | ASTM D-256 | 880 J/m |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IRF |
|---|---|---|---|
| dielectric strength | ASTM D-149 | 16 MV/m | |
| Volume resistivity | ASTM D-257 | 4-016 ohm-cm | |
| dielectric constant | 106Hz | ASTM D-150 | 25.2 Pf/m |
| Dielectric loss | 106Hz | ASTM D-150 | 0.0092 |
| Surface Resistivity | ASTM D-257 | >1015 Ohm |
| physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IRF |
|---|---|---|---|
| Water absorption rate | 23℃，24时间 | ASTM D-570 | 0.15 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7022IRF |
|---|---|---|---|
| Heat distortion temperature | 0.455KPa，HDT | ASTM D-648 | 145 °C |
| UL flame retardant rating | 1.6mm | UL 94 | V-2 |
Contact Us
Get App
Top