Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 CM1056 TORAY JAPAN
Amilan®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
Rockwell hardness | R-Sale,23°C | 114 -- |
Basic Performance | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
Water absorption rate | 23℃,24hr | ASTM D-570 | 3.0%Water|- % |
23℃ | ASTM D-570 | 3.0%Water|- % |
thermal performance | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
Hot deformation temperature | 1.86MPa | ASTM D-648 | 3.0%Water|- °C |
0.45MPa,Unannealed | °C | 160 -- | |
0.46MPa | ASTM D-648 | 3.0%Water|- °C | |
1.8MPa,Unannealed | °C | 51.0 -- | |
Linear coefficient of thermal expansion | ASTM D-696 | 3.0%Water|- 10-5/℃ | |
MD | cm/cm/°C | 8.0E-5到9.0E-5 -- | |
Melting temperature | °C | 225 -- | |
DSC | 225 °C |
mechanical properties | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
Bending modulus | -40°C | MPa | 2900 -- |
-40℃ | ASTM D-790 | Dry|2.9 GPa | |
23°C | MPa | 2100 700 | |
23℃ | ASTM D-790 | 3.0%Water|0.7 GPa | |
80℃ | ASTM D-790 | 3.0%Water|- GPa | |
80°C | MPa | 500 -- | |
bending strength | -40℃ | ASTM D-790 | 3.0%Water|- Mpa |
-40°C | MPa | 130 -- | |
23℃ | ASTM D-790 | 3.0%Water|- Mpa | |
23°C | MPa | 80.0 -- | |
Elongation at Break | -40℃ | ASTM D-638 | 3.0%Water|5.0 % |
80℃ | ASTM D-638 | 3.0%Water|<200 % | |
23℃ | ASTM D-638 | 3.0%Water|<200 % | |
Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 3.0%Water|690 J/m |
-40℃ | ASTM D-256 | 3.0%Water|- J/m | |
Rockwell hardness | 23℃ | ASTM D-785 | Dry|114 R scale |
ASTM D785 | 114 | ||
Suspended wall beam without notch impact strength | 23℃ | ASTM D-256 | 3.0%Water|- kJ/m² |
Taber abraser | 1000Cycles | mg | 6.00to7.00 -- |
Tensile strain | Break,80°C | % | 50 |
Break,23°C | % | 50 | |
Break,-40°C | % | 3.5 1.0 | |
tensile strength | Yield,-40℃ | ASTM D-638 | 3.0%Water|95 Mpa |
80°C | MPa | 25.0 20.0 | |
23°C | MPa | 60.0 35.0 | |
Yield,23℃ | ASTM D-638 | 3.0%Water|35 Mpa | |
Yield,80℃ | ASTM D-638 | 3.0%Water|20 Mpa | |
-40°C | MPa | 105 95.0 |
Physical properties | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.09 | |
Water absorption rate | Saturation,23°C | % | 8.0 -- |
23°C,24hr | % | 1.7 -- | |
ASTM D570/ISO 62 | 1.7 % |
impact performance | Test Condition | Test Method | TORAY JAPAN/CM1056 |
---|---|---|---|
Impact strength of simply supported beam without notch | -40°C | kJ/m² | 16 54 |
23°C | 无断裂 -- |