Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

NBR NANCAR® 2865 Nantex Industry Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 2865 |
|---|---|---|---|
| Shore hardness | ShoreA2 | ASTM D2240 | 72 |
| ShoreA3 | ASTM D2240 | 73 |
| thermal performance | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 2865 |
|---|---|---|---|
| Heat loss | ASTM D5688 | 0.20 % |
| Physical properties | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 2865 |
|---|---|---|---|
| bound acrylonitrile content | Internal Method | 28.0 % | |
| density | 0.970 g/cm³ | ||
| Mooney viscosity | ML1+4,100°C | ASTM D1646 | 65 MU |
| Soluble inMEK | 100 % | ||
| stabilizer | Non-staining |
| elastomer | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 2865 |
|---|---|---|---|
| elongation | Break6 | ASTM D412 | 560 % |
| Break5 | ASTM D412 | 580 % | |
| Break4 | ASTM D412 | 610 % | |
| Permanent compression deformation | 100°C,70hr | ASTM D395 | 60 % |
| tear strength | ASTM D624 | 59.8 kN/m | |
| tensile strength | 300%Strain5 | ASTM D412 | 10.5 MPa |
| 300%Strain4 | ASTM D412 | 9.71 MPa | |
| 300%Strain6 | ASTM D412 | 11.0 MPa | |
| Yield2 | ASTM D412 | 28.6 MPa | |
| Yield3 | ASTM D412 | 27.8 MPa | |
| Yield7 | ASTM D412 | 28.2 MPa |
| aging | Test Condition | Test Method | Nantex Industry Co., Ltd./NANCAR® 2865 |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#3油中 | ASTM D471 | -12 |
| ShoreA,100°C,70hr | ASTM D865 | 2.0 | |
| 支撐A,100°C,70hr,在ASTM#1油中 | ASTM D471 | -1.0 | |
| Change rate of tensile strength in air | 100°C,70hr | ASTM D865 | -6.0 % |
| 100°C,70hr,在ASTM#1油中 | ASTM D471 | -7.0 % | |
| 100°C,70hr,在ASTM#3油中 | ASTM D471 | -26 % | |
| Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -19 % |
| 100°C,70hr,在ASTM#3油中 | ASTM D471 | -22 % | |
| 100°C,70hr | ASTM D865 | -24 % | |
| Volume change | 100°C,70hr,ASTM标准油(3号) | ASTM D471 | 22 % |
| 100°C,70hr,ASTM标准油(1号) | ASTM D471 | 2.0 % |