PC G-3120PH QG0409P PC vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC TEIJIN JAPAN G-3120PH QG0409P

Injection grade

US$ 4,410 / MT

FOB Shenzhen Port

Electrical performance	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
Dielectric constant	10	ASTM D-150	3.07
Arc resistance		ASTM D-495	100 sec
Volume resistivity		ASTM D-257	1
Dielectric strength	快速加压值厚度1.6mm	ASTM D-149	30 KV/mm
Dielectric loss	10，Tangent	ASTM D-150	0.009
Dielectric loss		60Hz，Tangent	ASTM D-150	0.0008
Conductive Track Resistance (CTI)		IEC 112	180 V
Dielectric constant	60Hz	ASTM D-150	3.16
thermal performance	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
Temperature index	电学式，厚度1.47mm	UL 746B	130 °C
Hot deformation temperature	负荷1.813MPa(18.6kgf/cm)	ASTM D-648	146 °C
Temperature index	非冲击式，厚度1.47mm	UL 746B	130 °C
Hot deformation temperature	负荷0.451MPa(4.6kgf/cm)	ASTM D-648	150 °C
Linear coefficient of thermal expansion	Flow	ASTM D-696	4.0
Linear coefficient of thermal expansion		Across Flow	ASTM D-696	6.7
Temperature index	冲击式，厚度1.47mm	UL 746B	120 °C
mechanical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
bending strength		ASTM D-790	132(1350) MPa(Kgf/cm
Impact strength of cantilever beam gap	艾氏、带Notched厚度3.2mm	ASTM D-256	90(9) J/m(kgf·cm/cm)
tensile strength	Break点	ASTM D-638	83(850) MPa(Kgf/cm
compressive strength		ASTM D-695	109(1110) MPa(Kgf/cm
Impact strength of cantilever beam gap	艾氏、带Notched厚度6.4mm	ASTM D-256	90(9) J/m(kgf·cm/cm)
Bending modulus		ASTM D-790	3530(36000) MPa(Kgf/cm
Tensile modulus		ASTM D-638	4120(42000) MPa(Kgf/cm
Basic Performance	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
Water absorption rate	24hr，in 23℃	ASTM D-570	0.16 %
machinability	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
Shrinkage rate	Across Flow	ASTM D-955	0.4-0.6 %
Shrinkage rate		Flow	ASTM D-955	0.3-0.5 %
Physical properties	Test Condition	Test Method	TEIJIN JAPAN/G-3120PH QG0409P
Rockwell hardness		ASTM D-785	86 M标度
Transmittance rate	厚度3mm	ASTM D-1003	半透明 %

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index