Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT TYNEP® P8150 TYNE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TYNE USA/TYNEP® P8150 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 32 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 270 J/m |
| Electrical performance | Test Condition | Test Method | TYNE USA/TYNEP® P8150 |
|---|---|---|---|
| dielectric strength | 1.57mm,inAir | ASTM D149 | 24 kV/mm |
| Volume resistivity | ASTM D257 | 6E+16 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.020 |
| dielectric constant | 1MHz | ASTM D150 | 3.50 |
| Mechanical properties | Test Condition | Test Method | TYNE USA/TYNEP® P8150 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.0 % |
| tensile strength | 断裂 | ASTM D638 | 89.6 MPa |
| Flexural modulus | ASTM D790 | 4480 MPa | |
| bending strength | ASTM D790 | 131 MPa |
| physical property | Test Condition | Test Method | TYNE USA/TYNEP® P8150 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.20 % |
| density | ASTM D792 | 1.15 g/cm³ |
| Thermal performance | Test Condition | Test Method | TYNE USA/TYNEP® P8150 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 204 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 160 °C |
Contact Us
Get App
Top