plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC K-1300Y TEIJIN JAPAN

PANLITE®

transparent,Translucent accessories,film,sheet,Cleaning Compound

transparent

UL

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
Hot deformation temperature	1.80MPa	ISO 75-1	132 °C
		0.45MPa,Unannealed	ISO 75-2/B	145 °C
		1.8MPa,Unannealed	ISO 75-2/A	132 °C
		HDT	ASTM D648/ISO 75	145 ℃（℉）
Linear coefficient of thermal expansion		ISO 11359-2	0.7
			ASTM D696/ISO 11359	0.7 mm/mm.℃
		TD	ISO 11359-2	7E-05 cm/cm/°C
		MD	ISO 11359-2	7E-05 cm/cm/°C
RTI Elec	1.5mm	UL 746	125 °C
RTI Imp	1.5mm	UL 746	115 °C
RTI Str	1.5mm	UL 746	125 °C
UL flame retardant rating		UL 94	HB
Vicat softening temperature		ASTM D1525/ISO R306	151 ℃（℉）
			ISO 306/B50	151 °C
			ISO 306	151 °C

mechanical properties	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
Bending modulus		ISO 178	2200 Mpa
Bending modulus			ASTM D790/ISO 178	2200 kg/cm²(MPa)[Lb/in²]
bending strength		ISO 178	90.0 Mpa
bending strength			ASTM D790/ISO 178	90 kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	6 %
elongation		Break	ISO 527-1	＞50 %
Elongation at Break		ASTM D638/ISO 527	>50 %
elongation at yield		ISO 527-1	6 %
Impact strength of cantilever beam gap	带Notched	ISO 179	89 KJ/m
			ASTM D256/ISO 179	89 kg·cm/cm(J/M)ft·lb/in
		没Notched	ISO 179	NB KJ/m
Nominal tensile fracture strain		ISO 527-2/50	>50 %
Tensile modulus		ASTM D638/ISO 527	2400 kg/cm²(MPa)[Lb/in²]
			ISO 527-2/1	2350 Mpa
			ISO 527-1	2350 Mpa
Tensile strain	Yield	ISO 527-2/50	6.0 %
tensile strength	Yield	ISO 527-2/50	60.0 Mpa
Tensile stress		ISO 527-1	60 Mpa

Electrical performance	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
Arc resistance		ASTM D495/IEC 60112	30
Compared to the anti leakage trace index		IEC 60112	PLC 2
Dielectric constant	1MHz	IEC 60250	3
			ASTM D150/IEC 60250	3.1
		100HZ	IEC 60250	3.1
Dielectric loss	100HZ，Tangent	IEC 60250	10
Dielectric loss		1MHZ，Tangent	IEC 60250	90
Dielectric strength		IEC 60243-1	30 KV/mm
Dissipation factor	1MHz	IEC 60250	9E-03
Dissipation factor		100Hz	IEC 60250	1E-03
Relative permittivity	100Hz	IEC 60250	3.10
Relative permittivity		1MHz	IEC 60250	3.00
Surface resistivity		IEC 60093	＞1×10 Ω
			ASTM D257/IEC 60093	>1×10 15 Ω
			IEC 60093	>1.0E+15 ohms
Volume resistivity		ASTM D257/IEC 60093	>1×10 13 Ω.cm
			IEC 60093	>1.0E+15 ohms·cm
			IEC 60093	＞1×10 Ω.m

Physical properties	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
density		ASTM D792/ISO 1183	1200
Melt Volume Flow Rate (MVR)		ISO 1133	2.5 CM
Melt Volume Flow Rate (MVR)		300°C/1.2kg	ISO 1133	2.80 cm3/10min
Shrinkage rate			0.5-0.7 %
			ASTM D955	0.5-0.7 %
		MD:4.00mm	Internal Method	0.50-0.70 %
		TD:4.00mm	Internal Method	0.50-0.70 %
Water absorption rate	23℃,24hrs	ISO 62	0.2 %
		23°C,24hr	ISO 62	0.20 %
			ASTM D570/ISO 62	0.2 %

impact performance	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
Impact strength of simply supported beam without notch		ISO 179	NoBreak

flammability	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
UL flame retardant rating	0.38mm	UL 94	HB

optical performance	Test Condition	Test Method	TEIJIN JAPAN/K-1300Y
Refractive index		ASTM D542	1.585
Refractive index			ASTM D542/ISO 489	1.585
transmissivity	3000μm	ASTM D1003	88.0 %
Transmittance rate	3mm厚	ASTM D1003	88 %
Transmittance rate			ASTM D1003/ISO 13468	88 %

Contact Us

Get App

Top