Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS MAGNUM™ 3525 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/MAGNUM™ 3525 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C,注塑 | ISO 179/2C | 12 kJ/m² |
| 23°C,注塑 | ISO 179/1eA | 17 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C,注塑 | ISO 180/A | 10 kJ/m² |
| 23°C,注塑 | ISO 180/A | 17 kJ/m² | |
| Charpy Notched Impact Strength | -30°C,注塑 | ISO 179/1eA | 11 kJ/m² |
| -30°C,注塑 | ISO 179/2C | 8.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Trinseo/MAGNUM™ 3525 |
|---|---|---|---|
| tensile strength | 屈服,3.20mm,注塑 | ISO 527-2/50 | 43.0 MPa |
| 屈服,3.20mm,注塑 | ISO 527-2/100 | 44.0 MPa | |
| Flexural modulus | 3.20mm,InjectionMolded | ISO 178 | 2100 MPa |
| bending strength | 3.20mm,InjectionMolded | ISO 178 | 65.0 MPa |
| Tensile modulus | 3.20mm,注塑 | ISO 527-2 | 2200 MPa |
| Tensile strain | 屈服,3.20mm,注塑 | ISO 527-2/50 | 3.3 % |
| 屈服,3.20mm,注塑 | ISO 527-2/100 | 3.3 % |
| flammability | Test Condition | Test Method | Trinseo/MAGNUM™ 3525 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| burning rate | 2.00mm | ISO 3795 | 60 mm/min |
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Trinseo/MAGNUM™ 3525 |
|---|---|---|---|
| Shrinkage rate | MD | ISO 294-4 | 0.40to0.70 % |
| density | ISO 1183/B | 1.05 g/cm³ | |
| Apparent density | ISO 60 | 0.65 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ISO 1133 | 11 g/10min |
| Thermal performance | Test Condition | Test Method | Trinseo/MAGNUM™ 3525 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,退火，HDT | ISO 75-2/A | 101 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 78.0 °C |
Contact Us
Get App
Top