Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LLDPE Osterlene® LLM1018SA OSTERMAN USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | OSTERMAN USA/Osterlene® LLM1018SA |
|---|---|---|---|
| Initial sealing temperature | ASTMF88 | 102 °C |
| film | Test Condition | Test Method | OSTERMAN USA/Osterlene® LLM1018SA |
|---|---|---|---|
| Thin film puncture strength | ASTM D3763 | 77.0 N | |
| tensile strength | TD:断裂 | ASTM D882 | 56.5 MPa |
| Elmendorf tear strength | MD | ASTM D1922 | 220 g |
| Thin film puncture strength | ASTM D3763 | 6.28 J | |
| tensile strength | TD:屈服 | ASTM D882 | 10.0 MPa |
| elongation | MD:断裂 | ASTM D882 | 500 % |
| Secant modulus | 1%正割,TD | ASTM D882 | 208 MPa |
| Elmendorf tear strength | TD | ASTM D1922 | 430 g |
| tensile strength | MD:断裂 | ASTM D882 | 74.5 MPa |
| elongation | TD:断裂 | ASTM D882 | 600 % |
| Secant modulus | 1%正割,MD | ASTM D882 | 179 MPa |
| tensile strength | MD:屈服 | ASTM D882 | 12.8 MPa |
| physical property | Test Condition | Test Method | OSTERMAN USA/Osterlene® LLM1018SA |
|---|---|---|---|
| density | ASTM D1505 | 0.918 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 1.0 g/10min |
Contact Us
Get App
Top