Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS AS002(AS-1002) SABIC INNOVATIVE US
LNP™ FARADEX™
Electronic and electrical components
Conductive,Conductive,Electromagnetic shielding,RF shielding (polymorphis
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE US/AS002(AS-1002) |
---|---|---|---|
Water absorption rate | 24hr | ASTM D-570 | 0.20 % |
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/AS002(AS-1002) |
---|---|---|---|
Hot deformation temperature | 1.80MPa,Unannealed | ASTM D-648 | 87.8 °C |
0.45MPa,Unannealed | ASTM D-648 | 97.2 °C | |
Linear coefficient of thermal expansion | Transverse | ASTM E-831 | 0.000096 cm/cm/℃ |
Flow | ASTM E-831 | 0.000079 cm/cm/℃ |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AS002(AS-1002) |
---|---|---|---|
Bending modulus | ASTM D-790 | 2820 Mpa | |
bending strength | ASTM D-790 | 75.8 Mpa | |
Elongation at Break | ASTM D-638 | 8.6 % | |
elongation at yield | ASTM D-638 | 2.2 % | |
Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 58.7 J/m |
Suspended wall beam without notch impact strength | 3.18mm | ASTM D-256 | 286 J/m |
Tensile modulus | ASTM D-638 | 3000 Mpa | |
tensile strength | Yield | ASTM D-638 | 42.7 Mpa |
Break | ASTM D-638 | 39.3 Mpa |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/AS002(AS-1002) |
---|---|---|---|
Surface resistivity | ASTM D-4496 | 1.0-1.0E+5 ohms | |
Volume resistivity | ASTM D-257 | 1E+06 ohm.cm |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AS002(AS-1002) |
---|---|---|---|
Shrinkage rate | Across,Flow,24hr | ASTM D-955 | 27 % |
Flow,24hr | ASTM D-955 | 18 % |