Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT/ASA S 4090 G2 BK BASF GERMANY

Ultradur®

Laptop case,Shell,Engineering accessories,Laptop case,Applied in fields that require high performance le,As for the load-bearing parts in different industr,Shell,Engineering accessories,Laptop case

Low warpage,Dimensional stability,Filler: Glass fiber reinf,10% filler by weight,filler,Glass fiber reinforced ma,10%,Filler by weight

Plastic Datasheets

Other performance	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
Fiberglass content			20 %

Basic Performance	Test Method	BASF GERMANY/S 4090 G2 BK
density	ISO 1183	1.39 g/cm³
melt mass-flow rate	ISO 1133	20 cm3/10min
Water absorption rate		0.4 %

machinability	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
Melt Temperature			250-270 °C
Mold temperature			60-100 °C

flame retardancy	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
UL flame retardant rating	Allcolor	UL -94	HB 1.50mm
		Allcolor	UL -94	HB 3.00mm
		Allcolor	UL -94	HB 0.71mm

thermal performance	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
Combustibility		UL 94	HB
Hot deformation temperature	1.80 MPa		160 °C
		0.45MPaUnannealed	ISO 75-2/Bf	190 °C
		1.80MPaUnannealed	ISO 75-2/Af	105 °C
Linear coefficient of thermal expansion		ISO 11359-1/-2	0.4 E-4/°C
Linear coefficient of thermal expansion		MD	ISO 11359-2	5.5E-05 cm/cm/°C
Melting temperature		ISO 11357-3	223 °C
thermal conductivity		DIN 52612	0.27 W/m/K

mechanical properties	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
Ball Pressure Test		ISO 2039-1	153 Mpa
bending strength		ISO 178	151 Mpa
bending strength		23°C	ISO 178	119 Mpa
Charpy Notched Impact Strength			7 kJ/m²
Charpy Notched Impact Strength		23°C	ISO 179/1eA	4.0 kJ/m²
elongation	Break		2.5 %
Elongation at Break	23°C	ISO 527-2	2.9 %
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	37 kJ/m²
		-30°C	ISO 179/1eU	24 kJ/m²
		23 ℃		55 kJ/m²
Tensile creep modulus	1000Hr	ISO 899-1	3300 Mpa
Tensile modulus		ISO 527-1/-2	6900 Mpa
Tensile modulus		23°C	ISO 527-2	4500 Mpa
tensile strength		ISO 527-1/-2	100 Mpa
tensile strength		23°C	ISO 527-2	75 Mpa

Electrical performance	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
Dielectric constant	23°C	IEC 60250	3.60 100HZ
Dielectric constant		23°C	IEC 60250	3.40 1MHz
Dielectric strength	1.50mm	IEC 60243-1	22 KV/mm
Dissipation factor	23°C	IEC 60250	0.021 1MHz
Dissipation factor		23°C	IEC 60250	3.1E-03 100HZ
Surface resistivity		IEC 60093	1E+14 Ω.cm
Volume resistivity		IEC 60093	1E+14 Ω.cm

Physical properties	Test Condition	Test Method	BASF GERMANY/S 4090 G2 BK
melt mass-flow rate	275℃/2.16Kg	ISO 1133	35 cm3/10min
Shrinkage rate	Across Flow		0.16 %
Water absorption rate	23°C,50RH	ISO 62	0.20 %
Water absorption rate		23°C,24hr	ISO 62	0.40 %

Get App

Top