Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ASA 776SE BK BASF GERMANY
Luran®S
--
Good strength
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| Rockwell hardness | R -Sale | ASTM D785 | 89 |
| thermal performance | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed | ASTM D648 | 83.0 °C |
| 0.45 MPa, Unannealed | ASTM D648 | 101 °C | |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 0.000095 cm/cm/℃ |
| Vicat softening temperature | ASTM D15253 | 92.0 °C |
| mechanical properties | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| Bending modulus | 23℃ | ASTM D790 | 1660 Mpa |
| bending strength | 23℃ | ASTM D790 | 47.0 Mpa |
| Charpy Notched Impact Strength | -40℃ | ASTM D256 | 51 J/m |
| 23℃ | ASTM D256 | 260 J/m | |
| elongation | Yield, 23℃ | ASTM D638 | 2.7 % |
| Tensile modulus | 23℃ | ASTM D638 | 1650 Mpa |
| tensile strength | Yield, 23℃ | ASTM D638 | 33.0 |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric constant | 1.00 mm, 1 MHz | ASTM D150 | 3.40 |
| 1 MHz | IEC 60250 | 3.40 | |
| 100 Hz | IEC 60250 | 3.80 | |
| Dielectric strength | IEC 60243-1 | 35 KV/mm | |
| Dissipation factor | 100 Hz | IEC 60250 | 0.0090 |
| 1 MHz | IEC 60250 | 0.034 | |
| Surface resistivity | ASTM D257 | >1.0E+13 Ohm | |
| Volume resistivity | ASTM D257 | >1.0E+14 ohm·cm |
| other | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| gloss | 60° | ASTM D523 | 48 |
| Physical properties | Test Condition | Test Method | BASF GERMANY/776SE BK |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | MVR 220°C/10.0 kg | ASTM D1238 | 4.00 cm3/10min |
| Shrinkage rate | MD | ASTM D955 | 0.55 % |
| Water absorption rate | Saturation, 23℃ | ASTM D570 | 1.7 % |