Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 Alloy Orgalloy® LT 5050 ARKEMA FRANCE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | ARKEMA FRANCE/Orgalloy® LT 5050 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | ISO 11359-22 | 1.7E-04 cm/cm/°C |
| TD | ISO 11359-22 | 1.8E-04 cm/cm/°C | |
| Melting temperature | ISO 11357-32 | 220 °C |
| mechanical properties | Test Condition | Test Method | ARKEMA FRANCE/Orgalloy® LT 5050 |
|---|---|---|---|
| Tensile creep modulus | 1hr | ISO 899-12 | -- MPa |
| 1000hr | ISO 899-12 | -- MPa | |
| Tensile modulus | ISO 527-22 | -- MPa | |
| Tensile strain | Break | ISO 527-22 | -- % |
| tensile strength | 50%Strain | ISO 527-22 | -- MPa |
| Electrical performance | Test Condition | Test Method | ARKEMA FRANCE/Orgalloy® LT 5050 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 601122 | ||
| Dielectric strength | IEC 60243-12 | 36 kV/mm | |
| Dissipation factor | 100Hz | IEC 602502 | -- |
| 1MHz | IEC 602502 | -- | |
| Relative permittivity | 100Hz | IEC 602502 | -- |
| 1MHz | IEC 602502 | -- | |
| Surface resistivity | IEC 600932 | -- ohms | |
| Volume resistivity | IEC 600932 | -- ohms·m |
| Physical properties | Test Condition | Test Method | ARKEMA FRANCE/Orgalloy® LT 5050 |
|---|---|---|---|
| density | ISO 11832 | 1040 kg/m³ | |
| Melt Volume Flow Rate (MVR) | 235°C/5.0kg | ISO 11332 | 2.00 cm³/10min |
| flammability | Test Condition | Test Method | ARKEMA FRANCE/Orgalloy® LT 5050 |
|---|---|---|---|
| Burning Behav. | 1.60mm | ISO 12102 | HB |
| Burning Behav.atthicknessh | 3.20mm | ISO 12102 | HB |