Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Resinext PC18RU Southland Polymers
--
currency
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 690 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 3200 J/m |
| hardness | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 70 |
| Mechanical properties | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 110 % |
| 屈服 | ASTM D638 | 6.0 % | |
| bending strength | 屈服 | ASTM D790 | 92.7 MPa |
| Flexural modulus | ASTM D790 | 2340 MPa | |
| tensile strength | 屈服 | ASTM D638 | 62.9 MPa |
| flammability | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-2 |
| physical property | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| density | ASTM D792 | 1.20 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.50to0.70 % |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 18 g/10min |
| Thermal performance | Test Condition | Test Method | Southland Polymers/Resinext PC18RU |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 132 °C |
Contact Us
Get App
Top