Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TSE Polidiemme® G/220 SOLVAY BELGIUM
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 26 |
| 邵氏A | ISO 868 | 84 | |
| IRHD hardness | ISO 48 | 89 |
| Electrical performance | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 8E-04 |
| Volume resistivity | 20°C | IEC 60502 | 4.1E+15 ohms·cm |
| dielectric constant | 20°C | IEC 60502 | 15000 Mohms·km |
| dielectric strength | ASTM D149 | 35 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 2.30 |
| Volume resistivity | 90°C | IEC 60502 | 1.4E+15 ohms·cm |
| dielectric constant | 90°C | IEC 60502 | 5000 Mohms·km |
| Mechanical properties | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| elongation | 断裂 | IEC 60811 | 500 % |
| Tensile modulus | IEC 60811 | 5.80 MPa | |
| tensile strength | 断裂 | IEC 60811 | 18.0 MPa |
| aging | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test | 拉伸强度变化 | IEC 60811 | 12 % |
| 拉伸伸长率变化 | IEC 60811 | 3 % | |
| Bending test variation - in air, | 150°C | IEC 60811 | 无开裂 |
| physical property | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| melt mass-flow rate | 190°C/2.16kg | 内部方法 | 0.45 g/10min |
| density | ASTM D792 | 0.900 g/cm³ | |
| Water absorption rate | 100°C | IEC 60811 | 1.00 mg/cm² |
| Thermal performance | Test Condition | Test Method | SOLVAY BELGIUM/Polidiemme® G/220 |
|---|---|---|---|
| thermosetting | 250°C，负荷断裂伸长率 | IEC 60811 | 60 % |
| 250°C，冷却后最大永久伸长率 | IEC 60811 | 5.0 % |
Contact Us
Get App
Top