plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC RX2530 451118 COVESTRO THAILAND

Makrolon®

Automotive Applications,Lighting installation,electrical equipment

Flame retardant,High mobility

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

hardness	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Ball Pressure Test		ISO 2039-1	118 Mpa

thermal performance	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Ball Pressure Test	132°C	IEC 60695-10-2	Pass
Glass transition temperature		ISO 11357-2	142 °C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	134 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	122 °C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	6.5E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD：23to55°C	ISO 11359-2	6.5E-05 cm/cm/°C
thermal conductivity	23°C	ISO 8302	0.20 W/m/K
Vicat softening temperature	--	ISO 306/B120	142 °C
Vicat softening temperature		--	ISO 306/B50	141 °C

mechanical properties	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Bending modulus	23°C	ISO 178	2400 Mpa
Bending strain	23°C	ISO 178	7.0 %
bending strength	23°C	ISO 178	100 Mpa
bending strength		3.5%Strain,23°C	ISO 178	74.0 Mpa
Nominal tensile fracture strain	23°C	ISO 527-2/50	>50 %
Tensile modulus	23°C	ISO 527-2/1	2400 Mpa
Tensile strain	Yield,23°C	ISO 527-2/50	6.1 %
Tensile strain		Break,23°C	ISO 527-2/50	130 %
tensile strength	Break,23°C	ISO 527-2/50	75.0 Mpa
tensile strength		Yield,23°C	ISO 527-2/50	67.0 Mpa

Electrical performance	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Surface resistivity		IEC 60093	1E+16 ohms
Volume resistivity	23°C	IEC 60093	1E+16 ohms·cm

Physical properties	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Apparent density		ISO 60	0.66 g/cm³
melt mass-flow rate	300°C/1.2kg	ISO 1133	16 g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	15.0 cm3/10min
Shrinkage rate	MD:2.00mm3	ISO 294-4	0.60 %
		TD	ISO 2577	0.60-0.80 %
		TD:2.00mm3	ISO 294-4	0.65 %
		MD	ISO 2577	0.60-0.80 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.12 %
Water absorption rate		Saturation,23°C	ISO 62	0.30 %

impact performance	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Charpy Notched Impact Strength	23°C,Partial Break	ISO 7391	70 kJ/m²
Charpy Notched Impact Strength		-30°C,Complete Break	ISO 7391	14 kJ/m²
Impact strength of cantilever beam gap	23°C,Partial Break	ISO 7391	65 kJ/m²
Impact strength of cantilever beam gap		-30°C,Complete Break	ISO 7391	12 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
		23°C	ISO 179/1eU	NoBreak
		-60°C	ISO 179/1eU	NoBreak
Multi axis Instrumented Impact Energy	-30°C	ISO 6603-2	70.0 J
Multi axis Instrumented Impact Energy		23°C	ISO 6603-2	60.0 J
Multi axis Instrumented Peak Impact Force	-30°C	ISO 6603-2	6200 N
Multi axis Instrumented Peak Impact Force		23°C	ISO 6603-2	5300 N

flammability	Test Condition	Test Method	COVESTRO THAILAND/RX2530 451118
Extreme Oxygen Index		ISO 4589-2	27 %
FlashIgnitionTemperature		ASTM D1929	480 °C
SelfIgnition		ASTM D1929	550 °C

Contact Us

Get App

Top