plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 D.AKV30H2.0 LANXESS USA
--
--
Filler: LANXESS, Germany
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Ball Pressure TestISO 2039-1220 Mpa
Supplementary InformationTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
ISO ShortcutISO 1874PA66.GHR.14-100.GF30
filmTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Thin film puncture strength--7ISO 6603-22.80 J
--8ISO 6603-22.30 J
--7ISO 6603-2900 N
--8ISO 6603-2800 N
thermal performanceTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Ball Pressure Test253°CIEC 60695-10-2Pass
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B250 °C
1.8MPa,UnannealedISO 75-2/A>240 °C
1.8MPa,Unannealed,4.00mmASTM D648>249 °C
0.45MPa,Unannealed,4.00mmASTM D648>249 °C
Linear coefficient of thermal expansionTD：23to55°CISO 11359-29E-05 cm/cm/°C
MD：23to55°CISO 11359-23E-05 cm/cm/°C
Melting temperatureISO 11357-3263 °C
RTI Elec0.75mmUL 746125 °C
1.5mmUL 746125 °C
RTI Imp1.5mmUL 746105 °C
0.75mmUL 74690.0 °C
RTI Str1.5mmUL 746115 °C
0.75mmUL 746110 °C
Vicat softening temperature--ISO 306/B120>230 °C
--ISO 306/B50230 °C
mechanical propertiesTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Bending modulus23°CISO 178/A9200 Mpa
23°CASTM D7908690 Mpa
bending strengthFlexuralStrainatFlexuralStrength6(23°C)4.0 %
23°CASTM D790270 Mpa
23°CISO 178270 Mpa
3.5%StrainISO 178/A265 Mpa
elongationBreak,23°CASTM D6383.0 %
Nominal tensile fracture strain23°CISO 527-2/504.4 %
Tensile modulus23°CASTM D6389170 Mpa
23°CISO 527-2/110000 Mpa
Tensile strainBreak,23°CISO 527-2/53.0 %
tensile strengthBreak,23°CISO 527-2/5175 Mpa
Break,23°CASTM D638170 Mpa
Electrical performanceTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Compared to the anti leakage trace indexSolutionAIEC 60112 V
Dielectric constant23°C,50HzIEC 602504.00
23°C,1MHzIEC 602504.00
Dielectric strength23°C,1.00mmIEC 60243-135 KV/mm
23°C,3.00mmIEC 60243-130 KV/mm
Dissipation factor23°C,100HzIEC 602500.012
23°C,50HzIEC 602500.012
23°C,1MHzIEC 602500.0190.019
Relative permittivity23°C,1MHzIEC 602504.00
23°C,100HzIEC 602504.00
Surface resistivityIEC 600931E+15 ohms
Volume resistivity23°CIEC 600931E+15 ohms·cm
Physical propertiesTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Apparent densityISO 600.70 g/cm³
Shrinkage rateTD:290°C,2.00mm2ISO 294-40.93 %
TD:120°C,2hr,2.00mm3ISO 294-40.13 %
MD:120°C,2hr,2.00mm3ISO 294-40.070 %
MD:290°C,2.00mm2ISO 294-40.39 %
Water absorption rateEquilibrium,23°C,50%RHISO 622.0 %
Saturation,23°CISO 625.5 %
impact performanceTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
Impact strength of simply supported beam without notch-30°CISO 179/1eU60 kJ/m²
23°CISO 179/1eU75 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U60 kJ/m²
-30°CISO 180/1U55 kJ/m²
flammabilityTest ConditionTest MethodLANXESS USA/D.AKV30H2.0
BurningBehavior>1.00mmISO 3795passed
Burning wire flammability index1.6mmIEC 60695-2-12700 °C
3.0mmIEC 60695-2-12700 °C
0.8mmIEC 60695-2-12700 °C
Extreme Oxygen IndexISO 4589-223 %
UL flame retardant rating0.75mmUL 94HB
3.0mmUL 94HB
3.2mmUL 94HB
1.5mmUL 94HB
1.6mmUL 94HB

Contact Us

Get App

Top