Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | | 0.20 | % |
Modeling Shrinkage | TD:3.20mm | | 0.50 | % |
Moisture Absorption | 23°C,24hr | ASTMD570 | 0.020 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | | ASTMD638 | 186 | Mpa |
Tensile Stress | | ISO527-2 | 190 | Mpa |
Tensile Elongation | Break | ASTMD638 | 1.6 | % |
Tensile Strain | Break | ISO527-2 | 1.6 | % |
Flexural Modulus | | ASTMD790 | 14500 | Mpa |
Flexural Modulus | | ISO178 | 14000 | Mpa |
Flexural Strength | | ASTMD790 | 269 | Mpa |
Flexural Stress | | ISO178 | 280 | Mpa |
Compressive Strength | | ASTMD695 | 255 | Mpa |
Poisson Ratio | | | 0.40 | |
CoefficientofFriction3 | vs.Steel-Dynamic | ASTMD3702 | 0.32 | |
WearRate3 | | ASTMD3702 | 1.6E-06 | m/hr |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8MPa,Unannealed | ASTMD648 | 265 | °C |
Coefficient of Linear Thermal Expansion | MD:-50to50°C | ASTME831 | 1.5E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | MD:100to200°C | ASTME831 | 1E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:-50to50°C | ASTME831 | 4E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:100to200°C | ASTME831 | 8E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:导热系数 | ASTME831 | 0.33 | W/m/K |
UL Temperature Rating | | UL746B | 180 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTMD257 | 1E+16 | ohms |
Volume Resistivity | | ASTMD257 | 1E+16 | ohms·cm |
Dielectric Strength | | ASTMD149 | 22 | KV/mm |
Dielectric Constant | 25°C,1kHz | ASTMD150 | 3.70 | |
Dielectric Constant | 25°C,1MHz | ASTMD150 | 3.70 | |
Dissipation Factor | 25°C,1kHz | ASTMD150 | 2E-03 | |
Dissipation Factor | 25°C,1MHz | ASTMD150 | 3E-03 | |
Comparative Tracking Index | CTI | UL746 | 150 | V |
InsulationResistance4 | 90°C | | 1E+11 | ohms |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Unnotched Izod Impact Strength | 3.18mm | ASTMD4812 | 750 | J/m |
Unnotched Izod Impact Strength | | ISO180 | 40 | kJ/m² |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Sale | ASTMD785 | 97 | |
Rockwell Hardness | R-Sale | ASTMD785 | 117 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.6mm | UL94 | V-0 | |
Oxygen Index | | ASTMD2863 | 48 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.