Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Color | | | Natural | |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | | ASTM D-790 | 32.0 | Ksi |
Tensile Elongation | | ASTM D-638 | 1.3 | % |
Tensile Strength | | ASTM D-638 | 25.0 | Ksi |
Tensile Strength | | ASTM D-695 | 35.0 | Ksi |
Tensile Modulus | | ASTM D-790 | 2.1 | Msi |
Izod Impact Strength | 1/8inch有缺 | ASTM D-256 | 1.6 | ft.lbf/in |
Izod Impact Strength | 1/8inch无缺 | ASTM D-256 | 8.0 | ft.lbf/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | | ASTM D-648 | >500 | °F |
Flammability | | UL 94 | V-0/5VA | |
UL Temperature Index | | UL | 200/220 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Dissipation Factor | 1MHz | ASTM D-150 | 0.003 | |
Comparative Tracking Index | | UL 746A | 175 | V |
Dielectric Constant | 1MHz | ASTM D-149 | 3.9 | |
Dielectric Constant | 1KHz | ASTM D-150 | 4.0 | |
Comparative Tracking Index | | UL 746A | 14.0 | in/min |
Dissipation Factor | 1KHz | ASTM D-150 | 0.002 | |
Volume Resistivity | | ASTM D-257 | 2×10 | Ω.cm |
Insulation Resistance | | ASTM D-149 | 500 | v/mil |
Insulation Resistance | 90℃,48hrs | | 1×10 | Ω |
Arc Resistance | | ASTM D-495 | 125 | sec |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTM D-792 | 1.65 | g/10min |
Moisture Absorption | | ASTM D-570 | 0.05 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.