Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | 内部方法 | 0.17 | % |
Modeling Shrinkage | TD | 内部方法 | 0.40 | % |
Moisture Absorption | Saturation | ASTMD570 | 0.020 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield | ASTMD638 | 130 | Mpa |
Tensile Elongation | Break | ASTMD638 | 4.5 | % |
Flexural Modulus | 23°C | ASTMD790 | 12500 | Mpa |
Flexural Strength | Yield,23°C | ASTMD790 | 140 | Mpa |
Shearing Strength | | ASTMD732 | 54.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8MPa,Unannealed | ASTMD648 | 270 | °C |
Coefficient of Linear Thermal Expansion | MD:150°C | 内部方法 | 4E-06 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:150°C | 内部方法 | 8.1E-05 | cm/cm/°C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTMD257 | 1E+15 | ohms·cm |
Dielectric Constant | 1MHz | ASTMD150 | 3.80 | |
Dielectric Constant | 1.00GHz | ASTMD150 | 3.60 | |
Dissipation Factor | 1MHz | ASTMD150 | 0.038 | |
Dissipation Factor | 1.00GHz | ASTMD150 | 4E-03 | |
Arc Resistance | | ASTMD495 | 140 | sec |
Comparative Tracking Index | | IEC60112 | 190 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Unnotched Izod Impact Strength | 6.40mm | ASTMD256 | 270 | J/m |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Scale | ASTMD785 | 97 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.30mm,NC,BK | UL94 | V-0 | |
Oxygen Index | | ISO 489 | 44 | % |
Additional | Test Condition | Test Method | Test Result | Unit |
---|
SolderingResistance | | 内部方法 | 280 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.