Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 260°C/2.16kg | ASTMD1238 | 22 | g/10min |
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.40to0.60 | % |
Moisture Absorption | 24hr | ASTMD570 | 0.11 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ASTMD638 | 3000 | Mpa |
Tensile Strength | Yield | ASTMD638 | 63.0 | Mpa |
Tensile Strength | Break | ASTMD638 | 49.0 | Mpa |
Tensile Elongation | Yield | ASTMD638 | 4.0 | % |
Tensile Elongation | Break | ASTMD638 | 80 | % |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 2620 | Mpa |
Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 94.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 98.0 | °C |
Heat Deflection Temperature | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 83.0 | °C |
Heat Deflection Temperature | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 90.0 | °C |
Vicat Softening Temperature | | ASTMD15255 | 99.0 | °C |
RTIElec | | UL746 | 80.0 | °C |
RTIImp | | UL746 | 70.0 | °C |
RTIStr | | UL746 | 80.0 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Dielectric Strength | 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm |
Relative Permittivity | 50Hz | IEC60250 | 2.70 | |
Relative Permittivity | 60Hz | IEC60250 | 2.70 | |
Relative Permittivity | 1MHz | IEC60250 | 2.70 | |
Dissipation Factor | 50Hz | IEC60250 | 4E-03 | |
Dissipation Factor | 60Hz | IEC60250 | 4E-03 | |
Dissipation Factor | 1MHz | IEC60250 | 6E-03 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Instrumented Dart Impact | -30°C,TotalEnergy | ASTMD3763 | 51.0 | J |
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 51.0 | J |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.75mm | UL94 | V-2 | |
Flame Rating | 1.5mm | UL94 | V-0 | |
Flame Rating | 2.0mm | UL94 | 5VB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.