Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | 3.2mm | ASTM D-955 | 5-7 | |
Density / Specific Gravity | --- | ASTM D-792 | 1.21 | --- |
Flame Rating | --- | UL 94 | 1.6 | mm |
Flame Rating | --- | UL 94 | V-2 | --- |
Flame Rating | --- | UL 94 | 3.0 | mm |
Flame Rating | --- | UL 94 | V-0 | --- |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Impact Strength | 23℃ | ASTM D-256 | 640 | J/m |
Tensile Elongation (Break) | --- | ASTM D-638 | 90 | % |
Tensile Strength | Yield点,--- | ASTM D-638 | 62 | Mpa |
Tensile Strength | Break点,--- | ASTM D-638 | 56 | Mpa |
Rockwell Hardness | --- | ASTM D-785 | 118 | --- |
Flexural Modulus | --- | ASTM D-790 | 3250 | Mpa |
Flexural Strength | --- | ASTM D-790 | 91 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45MPa | ASTM D-648 | 137 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Constant | 60Hz | ASTM D-150 | 3.01 | --- |
Dielectric Constant | 1MHz | ASTM D-150 | 2.96 | --- |
Volume Resistivity | --- | ASTM D-257 | 1.0×10 | Ω.cm |
Dissipation Factor | 1MHz | ASTM D-150 | 0.01 | --- |
Dissipation Factor | 60Hz | ASTM D-150 | 0.0009 | --- |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | --- | ASTM D-570 | 0.15 | % |
Melt Mass-Flow Rate | --- | ASTM D-1238 | 7 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.