Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | | ASTM D1238 | 9 | g/10min |
Moisture Absorption | 23°C,60%RH | ASTM D570 | 0.22 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | 23°C | ASTM D638 | 62 | Mpa |
Tensile Elongation | 23°C | ASTM D638 | 60 | % |
Flexural Modulus | 23°C | ASTM D790 | 2650 | Mpa |
Flexural Strength | 23°C | ASTM D790 | 91.5 | Mpa |
Tensile Strength | t2mm | ASTM D732 | 56 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | 10°C/min | DSC | 165 | °C |
Coefficient of Linear Thermal Expansion | 20°C-80°C | E831 | 13 | *10 -5°C |
Heat Deflection Temperature | 0.46MPa | ASTM D648 | 158 | °C |
Heat Deflection Temperature | 1.86MPa | ASTM D648 | 110 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Impact Strength | t3.2mm,Notched | ASTM D256 | 6.5 | kJ/m² |
Tensile Impact Strength | t3.2mm | ASTM D1822 | 110 | kgf·cm/cm² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flammability | t0.8mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.