Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | 3.00 mm | | 2.0 到 2.2 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | | ISO 527-2 | 55.0 | Mpa |
Tensile Strain | Break | ISO 527-2 | > 35 | % |
Flexural Modulus | | ISO 178 | 2350 | Mpa |
Flexural Stress | | ISO 178 | 75.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8 MPa, Unannealed | ISO 75-2/A | 80.0 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC 60093 | 2.0E+14 | ohms |
Volume Resistivity | | IEC 60093 | 2.0E+14 | ohms·cm |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Drying Temperature | | | 100 | °C |
Drying Time | | | 3.0 | hr |
Processing (Melt) Temp | | | 170 到 200 | °C |
Mold Temperature | | | 60 到 100 | °C |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL 94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.