Need Help? Contact Us service@plas.com
Get App

PA66 Vydyne®  21SPC

321
  • Unit Price:
    $3610 USD/MT
  • Packaging Specification:
    25 KG/PKG
  • Supply Quantity:
    20MT
  • Delivery Terms:
    FOB
  • Port of Loading:
    Shekou port, China
  • Accepted Payment Methods:
    T/T
  • Shipping:
    Negotiate supplier for shipping details

Transaction Guarantee:

Supplier Information

Dongguan Damai Plastic Material Co., Ltd.

+86 133****15

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical PropertiesTest ConditionTest MethodTest ResultUnit
Modeling ShrinkageAcross Flow : 23°C, 2.00 mmISO 294-41.7%
Modeling Shrinkage流量 : 23°C, 2.00 mmISO 294-41.8%
Moisture Absorption24 hr, 23°CISO 621.2%
Moisture AbsorptionEquilibrium, 23°C, 50% RHISO 622.4%
Outdoor Suitability全部UL 746Cf2
DensityISO 11831.14g/cm³
Mechanical PropertiesTest ConditionTest MethodTest ResultUnit
Poisson RatioISO 5270.40
Tensile StressYield, 23°CISO 527-282.0Mpa
Tensile StressBreak, 23°CISO 527-255.0Mpa
Tensile StrainYield, 23°CISO 527-25.0%
Tensile Modulus23°CISO 527-23100Mpa
Flexural Modulus23°CISO 1782900Mpa
Flexural Strength23°CISO 17880.0Mpa
Nominal Tensile Strain at Break23°CISO 527-225%
Thermal PropertiesTest ConditionTest MethodTest ResultUnit
RTI0.40 mmUL 74675.0°C
RTI0.71 mmUL 74685.0°C
RTI1.5 mmUL 74685.0°C
RTI3.0 mmUL 74685.0°C
RTI Imp0.40 mmUL 74675.0°C
RTI Imp0.71 mmUL 74675.0°C
RTI Imp1.5 mmUL 74675.0°C
RTI Imp3.0 mmUL 74675.0°C
RTI Elec0.40 mmUL 746130°C
RTI Elec0.71 mmUL 746130°C
RTI Elec1.5 mmUL 746130°C
RTI Elec3.0 mmUL 746130°C
Heat Deflection Temperature0.45 MPa, UnannealedISO 75-2/B200°C
Heat Deflection Temperature1.8 MPa, UnannealedISO 75-2/A70.0°C
Coefficient of Linear Thermal ExpansionFlow : 23 to 55°CISO 11359-21.0E-4cm/cm/°C
Coefficient of Linear Thermal ExpansionAcross Flow : 23 to 55°CISO 11359-21.0E-4cm/cm/°C
Melting TemperatureISO 11357-3260°C
Electrical PropertiesTest ConditionTest MethodTest ResultUnit
Dielectric Strength1.00 mmIEC 6024326KV/mm
Comparative Tracking Index3.00 mmIEC 60112600V
Arc Resistance3.00 mmASTM D495PLC 5
Volume Resistivity0.750 mmIEC 600931.0E+13ohms·cm
High Amp Arc Ignition0.40 mmUL 746PLC 1
High Amp Arc Ignition0.71 mmUL 746PLC 0
High Amp Arc Ignition1.5 mmUL 746PLC 0
High Amp Arc Ignition3.0 mmUL 746PLC 0
Hot-wire Ignition0.40 mmUL 746PLC 4
Hot-wire Ignition0.71 mmUL 746PLC 4
Hot-wire Ignition1.5 mmUL 746PLC 3
Hot-wire Ignition3.0 mmUL 746PLC 2
High Voltage Arc Tracking RateUL 746PLC 0
InjectionTest ConditionTest MethodTest ResultUnit
Suggested Max Regrind50%
Drying Temperature< 70°C
Processing (Melt) Temp285 到 300°C
Mold Temperature65 到 95°C
Drying Time1.0 到 3.0hr
Rear Temperature260 到 280°C
Middle Temperature270 到 285°C
Front Temperature280 到 290°C
Nozzle Temperature280 到 300°C
Impact PropertiesTest ConditionTest MethodTest ResultUnit
Charpy Notched Impact Strength-30°CISO 179/1eA5.0kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA6.0kJ/m²
Notched Izod Impact Strength-30°CISO 1805.0kJ/m²
Notched Izod Impact Strength23°CISO 1806.0kJ/m²
Charpy Unnotched Impact Strength-30°CISO 179/1eU无断裂
Charpy Unnotched Impact Strength23°CISO 179/1eU无断裂
FlammabilityTest ConditionTest MethodTest ResultUnit
Glow Wire Flammability Index0.40 mmIEC 60695-2-12960°C
Glow Wire Flammability Index0.71 mmIEC 60695-2-12960°C
Glow Wire Flammability Index1.5 mmIEC 60695-2-12960°C
Glow Wire Flammability Index3.0 mmIEC 60695-2-12960°C
Oxygen IndexISO 4589-225%
Glow Wire Ignition Temperature0.40 mmIEC 60695-2-13825°C
Glow Wire Ignition Temperature0.71 mmIEC 60695-2-13850°C
Glow Wire Ignition Temperature1.5 mmIEC 60695-2-13850°C
Glow Wire Ignition Temperature3.0 mmIEC 60695-2-13850°C
Flame Rating0.40 mmUL 94V-2
Flame Rating0.71 mmUL 94V-2
Flame Rating1.5 mmUL 94V-2
Flame Rating3.0 mmUL 94V-2
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.