PEI ULTEM™ EX07305-WH8E546 SABIC INNOVATIVE SHANGHAI

Unit Price:
$16564 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD	内部方法	0.40	%
Modeling Shrinkage	Modeling Shrinkage	TD	内部方法	0.52	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Break		ISO527-2/5	1.2	%
Break	Break		ISO527-2/5	156	Mpa
Coefficient of Friction	Itself - Dynamic	ASTMD3702Modified	0.52
Break		ASTMD638	3.0	%
50.0mm Span		ASTMD790	6420	Mpa
--5		ISO178	7220	Mpa
--1		ASTMD638	8630	Mpa
Flexural Strength	Yield,50.0mmSpan	ASTMD790	202	Mpa
Flexural Strength	Flexural Strength	Break,50.0mmSpan	ASTMD790	201	Mpa
Specific Wear Rate		ASTMD3702Modified	15.6	10^-10in^5-min/ft-lb-hr
Break		ASTMD638	157	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Coefficient of Linear Thermal Expansion	MD:-40to40°C	ASTME831	1.4E-05	cm/cm/°C
Coefficient of Linear Thermal Expansion	Coefficient of Linear Thermal Expansion	TD:-40to40°C	ASTME831	5.1E-05	cm/cm/°C
1.8MPa, Unannealed,3.20mm		ASTMD648	204	°C
1.8MPa, Unannealed,64.0mm Span		ISO75-2/Af	207	°C

Electrical Properties	Test Condition	Test Method	Test Result	Unit
Dissipation Factor	100kHz	ASTMD150	3.1E-03
Surface Resistivity		ASTMD257	2E+13	ohms
Dielectric Constant	100kHz	ASTMD150	3.30
Volume Resistivity		ASTMD257	7.6E+16	ohms·cm
Dielectric Strength	1.60mm,inOil	ASTMD149	31	KV/mm

Impact Properties	Test Condition	Test Method	Test Result	Unit
23°C		ASTMD256	67	J/m
23°C	23°C		ASTMD4812	330	J/m
23°C7		ISO180/1A	7.8	kJ/m²
23°C8		ISO180/1U	26	kJ/m²

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.