Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.25 | % |
Modeling Shrinkage | TD | ASTMD955 | 1.1 | % |
Moisture Absorption | 23°C,24hr | ASTMD570 | 0.020 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ASTMD638 | 15000 | Mpa |
Tensile Strength | | ASTMD638 | 170 | Mpa |
Tensile Elongation | Break | ASTMD638 | 1.5 | % |
Flexural Modulus | | ASTMD790 | 13500 | Mpa |
Flexural Strength | | ASTMD790 | 260 | Mpa |
Compressive Strength | | ASTMD695 | 190 | Mpa |
Poisson Ratio | | | 0.36 | |
Coefficient of Friction | Steel - Dynamic | ASTMD1894 | 0.35 | |
Coefficient of Friction | Steel - Static | ASTMD1894 | 0.35 | |
Tensile Elongation (Break) | | ASTMD790 | 2.0 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8MPa,Unannealed | ASTMD648 | 265 | °C |
Coefficient of Linear Thermal Expansion | MD:-30to90°C | ASTMD696 | 2.2E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:-30to90°C | ASTMD696 | 2.2E-05 | cm/cm/°C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTMD257 | 1E+16 | ohms·cm |
Dielectric Strength | 1.60mm | ASTMD149 | 16 | KV/mm |
Dielectric Constant | 1MHz | ASTMD150 | 4.00 | |
Dissipation Factor | 1MHz | ASTMD150 | 2E-03 | |
Arc Resistance | | ASTMD495 | 125 | sec |
Comparative Tracking Index | | ASTMD3638 | 170 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Unnotched Izod Impact Strength | | ASTMD256 | 450 | J/m |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | M-Scale | ASTMD785 | 100 | |
Rockwell Hardness | R-Scale | ASTMD785 | 121 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.40mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.