Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Color | | | Natural | |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | | ASTM D-638 | 22.0 | Ksi |
Flexural Modulus | | ASTM D-638 | 2.2 | Msi |
Tensile Elongation | | ASTM D-638 | 1.2 | % |
Tensile Strength | | ASTM D-790 | 29.5 | Ksi |
Tensile Modulus | | ASTM D-790 | 2.1 | Msi |
Tensile Strength | | ASTM D-695 | 26.0 | Ksi |
Izod Impact Strength | 1/8inch有缺 | ASTM D-256 | 1.7 | ft.lbf/in |
Izod Impact Strength | 1/8inch无缺 | ASTM D-256 | 6.0 | ft.lbf/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flammability | | UL 94 | V-0/5VA | |
UL Temperature Index | | UL | 200/220 | °C |
Heat Deflection Temperature | 264psi | ASTM D-648 | >500 | °F |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTM D-257 | 1×10 | Ω.cm |
Dielectric Constant | 1KHz | ASTM D-150 | 3.9 | |
Comparative Tracking Index | | UL 746A | 7.1 | V |
Arc Resistance | | ASTM D-495 | 125 | sec |
Insulation Resistance | | ASTM D-149 | 450 | v/mil |
Dielectric Constant | 1MHz | ASTM D-149 | 3.8 | |
Insulation Resistance | | | 1×10 | Ω |
Dissipation Factor | 1MHz | ASTM D-150 | 0.0014 | |
Comparative Tracking Index | | UL 746A | 7.1 | in/min |
Dissipation Factor | 1KHz | ASTM D-150 | 0.002 | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | | ASTM D-570 | 0.05 | % |
Melt Mass-Flow Rate | | ASTM D-792 | 1.65 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.