Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density / Specific Gravity | | ISO1183 | 1.20 | g/cm³ |
Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 25.0 | cm3/10min |
Modeling Shrinkage | TD:4.00mm | 内部方法 | 0.50to0.70 | % |
Modeling Shrinkage | MD:4.00mm | 内部方法 | 0.50to0.70 | % |
Moisture Absorption | 23°C,24hr | ISO62 | 0.20 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-2/1 | 2400 | Mpa |
Tensile Stress | Yield | ISO527-2/50 | 62.0 | Mpa |
Tensile Strain | Yield | ISO527-2/50 | 6.0 | % |
Nominal Tensile Strain at Break | | ISO527-2/50 | >50 | % |
Flexural Modulus | | ISO178 | 2400 | Mpa |
Flexural Stress | | ISO178 | 95.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45MPa,Unannealed | ISO75-2/B | 136 | °C |
Heat Deflection Temperature | 1.8MPa,Unannealed | ISO75-2/A | 123 | °C |
Vicat Softening Temperature | | ISO306/B50 | 142 | °C |
Coefficient of Linear Thermal Expansion | MD | ISO11359-2 | 7E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD | ISO11359-2 | 7E-05 | cm/cm/°C |
RTIElec | 1.5mm | UL746 | 125 | °C |
RTIImp | 1.5mm | UL746 | 115 | °C |
RTIStr | 1.5mm | UL746 | 125 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
Volume Resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
Dielectric Strength | | IEC60243-1 | 30 | KV/mm |
Relative Permittivity | 100Hz | IEC60250 | 3.10 | |
Relative Permittivity | 1MHz | IEC60250 | 3.00 | |
Dissipation Factor | 100Hz | IEC60250 | 1E-03 | |
Dissipation Factor | 1MHz | IEC60250 | 9E-03 | |
Comparative Tracking Index | | IEC60112 | 250 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | | ISO179 | 53 | kJ/m² |
Charpy Unnotched Impact Strength | | ISO179 | NoBreak | |
Optical | Test Condition | Test Method | Test Result | Unit |
---|
Index of Refraction | | ASTMD542 | 1.585 | |
Light Transmittance | 3000µm | ASTMD1003 | 88.0 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 2.1mm | UL94 | HB | |
Flame Rating | 0.40mm | UL94 | V-2 | |
Glow Wire Flammability Index | 1.5mm | IEC60695-2-12 | 825 | °C |
Glow Wire Flammability Index | 3.2mm | IEC60695-2-12 | 875 | °C |
Glow Wire Ignition Temperature | 1.5mm | IEC60695-2-13 | 850 | °C |
Glow Wire Ignition Temperature | 3.2mm | IEC60695-2-13 | 875 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.