Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density / Specific Gravity | | ASTM D-792 | 无水|1.5 | |
Density / Specific Gravity | | ASTM D-792 | 1.9%水|- | |
Taber Abrasion Resistance | 1000g,CS-17 | ASTM D-1044 | 无水|30 | mg/1000次 |
Taber Abrasion Resistance | 1000g,CS-17 | ASTM D-1044 | 1.9%水|- | mg/1000次 |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation (Break) | 23℃ | ASTM D-638 | 无水|5 | % |
Tensile Elongation (Break) | 23℃ | ASTM D-638 | 1.9%水|5 | % |
Flexural Modulus | 23℃ | ASTM D-790 | 无水|122000 | kg/cm2 |
Flexural Modulus | 23℃ | ASTM D-790 | 1.9%水|72000 | kg/cm2 |
Flexural Modulus | 80℃ | ASTM D-790 | 无水|63000 | kg/cm2 |
Flexural Modulus | 80℃ | ASTM D-790 | 1.9%水|45000 | kg/cm2 |
Flexural Modulus | -40℃ | ASTM D-790 | 无水|140000 | kg/cm2 |
Flexural Modulus | -40℃ | ASTM D-790 | 1.9%水|120000 | kg/cm2 |
Rockwell Hardness | 23℃ | ASTM D-785 | 无水|95 | M-标度 |
Rockwell Hardness | 23℃ | ASTM D-785 | 1.9%水|- | M-标度 |
Rockwell Hardness | 23℃ | ASTM D-785 | 无水|121 | R-标度 |
Flexural Stress | 23℃ | ASTM D-790 | 无水|2900 | kg/cm2 |
Flexural Stress | 23℃ | ASTM D-790 | 1.9%水|1850 | kg/cm2 |
Flexural Stress | 80℃ | ASTM D-790 | 无水|16000 | kg/cm2 |
Flexural Stress | 80℃ | ASTM D-790 | 1.9%水|- | kg/cm2 |
Flexural Stress | -40℃ | ASTM D-790 | 无水|3300 | kg/cm2 |
Flexural Stress | -40℃ | ASTM D-790 | 1.9%水|- | kg/cm2 |
Tensile Strength(Yield) | 23℃ | ASTM D-638 | 无水|2000 | kg/cm2 |
Tensile Strength(Yield) | 23℃ | ASTM D-638 | 1.9%水|1300 | kg/cm2 |
Tensile Strength(Yield) | 80℃ | ASTM D-638 | 无水|1200 | kg/cm2 |
Tensile Strength(Yield) | 80℃ | ASTM D-638 | 1.9%水|- | kg/cm2 |
Tensile Strength(Yield) | -40℃ | ASTM D-638 | 无水|2900 | kg/cm2 |
Tensile Strength(Yield) | -40℃ | ASTM D-638 | 1.9%水|- | kg/cm2 |
Compressive Strength | 23℃ | ASTM D-695 | 无水|1900 | kg/cm2 |
Compressive Strength | 23℃ | ASTM D-695 | 1.9%水|- | kg/cm2 |
Compressive Strength | 80℃ | ASTM D-695 | 无水|1000 | kg/cm2 |
Compressive Strength | 80℃ | ASTM D-695 | 1.9%水|- | kg/cm2 |
Compressive Strength | -40℃ | ASTM D-695 | 无水|2600 | kg/cm2 |
Compressive Strength | -40℃ | ASTM D-695 | 1.9%水|- | kg/cm2 |
Tensile Strength | 23℃ | ASTM D-732 | 无水|940 | kg/cm2 |
Tensile Strength | 23℃ | ASTM D-732 | 1.9%水|750 | kg/cm2 |
Rockwell Hardness | 23℃ | ASTM D-785 | 1.9%水|- | R-标度 |
Izod Impact Strength | 23℃,Unnotched1/8 | ASTM D-256 | 1.9%水|120 | kg·cm/cm |
Izod Impact Strength | -40℃,Unnotched1/8 | ASTM D-256 | 无水|12.5 | kg·cm/cm |
Izod Impact Strength | -40℃,Unnotched1/8 | ASTM D-256 | 1.9%水|15 | kg·cm/cm |
Izod Impact Strength | -40℃,Unnotched1/8 | ASTM D-256 | 无水|12.5 | kg·cm/cm2 |
Izod Impact Strength | -40℃,Unnotched1/8 | ASTM D-256 | 1.9%水|15 | kg·cm/cm2 |
Izod Impact Strength | 23℃,VNotched1/2 | ASTM D-256 | 无水|15 | kg·cm/cm |
Izod Impact Strength | 23℃,VNotched1/2 | ASTM D-256 | 1.9%水|20 | kg·cm/cm |
Izod Impact Strength | 23℃,Unnotched1/8 | ASTM D-256 | 无水|98 | kg·cm/cm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load | 4.6kg/cm2 | ASTM D-648 | 无水|225 | °C |
Deflection Temperature Under Load | 4.6kg/cm2 | ASTM D-648 | 1.9%水|- | °C |
Melting Temperature | | 差示扫描测热计DSC | 无水|225 | °C |
Melting Temperature | | 差示扫描测热计DSC | 1.9%水|- | °C |
Specific Heat | | | 无水|0.31 | Cal/g·℃ |
Specific Heat | | | 1.9%水|- | Cal/g·℃ |
Coefficient of Linear Thermal Expansion | | ASTM D-696 | 无水|2-3 | ×10-5cm/cm/℃ |
Coefficient of Linear Thermal Expansion | | ASTM D-696 | 1.9%水|- | ×10-5cm/cm/℃ |
Flame Rating | 1/32" | UL 94 | 无水|HB | |
Flame Rating | 1/32" | UL 94 | 1.9%水|- | |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Arc Resistance | 1/8" | ASTM D-495 | 无水|104 | S |
Arc Resistance | 1/8" | ASTM D-495 | 1.9%水|119 | S |
Dissipation Factor | 106Hz | ASTM D-150 | 无水|0.02 | |
Dissipation Factor | 106Hz | ASTM D-150 | 1.9%水|0.06 | |
Dielectric Strength | 1/8" | ASTM D-149 | 无水|19 | KV/mm |
Dielectric Strength | 1/8" | ASTM D-149 | 1.9%水|15 | KV/mm |
Dielectric Constant | 106Hz | ASTM D-150 | 无水|4.2 | |
Dielectric Constant | 106Hz | ASTM D-150 | 1.9%水|4.5 | |
Dielectric Constant | 103Hz | ASTM D-150 | 无水|4.9 | |
Dielectric Constant | 103Hz | ASTM D-150 | 1.9%水|7.4 | |
Volume Resistivity | | ASTM D-257 | 无水|1015 | Ω.cm |
Volume Resistivity | | ASTM D-257 | 1.9%水|1012 | Ω.cm |
Dissipation Factor | 50Hz | ASTM D-150 | 无水|0.03 | |
Dissipation Factor | 50Hz | ASTM D-150 | 1.9%水|0.16 | |
Other Properties | Test Condition | Test Method | Test Result | Unit |
---|
Reinforcement Content | | | 无水|45 | wt% |
Reinforcement Content | | | 1.9%水|- | wt% |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23℃,24hr | ASTM D-570 | 无水|0.9 | % |
Moisture Absorption | 23℃,24hr | ASTM D-570 | 1.9%水|- | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.