PC Makrolon® RX2430 451118 COVESTRO THAILAND
324
- Unit Price:US$ 5,104 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:54.8MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant｜High mobility
- Application Areas:Automotive Applications｜Lighting installation｜electrical equipment
- Color:--
- Grade:Medical grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Apparent density | ISO 60 | 0.66 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 20 g/10 min | |
| Melt volume flow rate | ISO 1133 | 19.0 cm3/10min | |
| Shrinkage rate | ISO 2577 | 0.60 - 0.80 % | |
| ISO 2577 | 0.60 - 0.80 % | ||
| ISO 294-4 | 0.65 % | ||
| ISO 294-4 | 0.60 % | ||
| Water absorption rate | ISO 62 | 0.30 % | |
| ISO 62 | 0.12 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 118 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-2 | |
| flash temperature | ASTM D1929 | 480 °C | |
| auto-ignition temperature | ASTM D1929 | 550 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2400 Mpa | |
| tensile strength | ISO 527-2/50 | 67.0 Mpa | |
| ISO 527-2/50 | 75.0 Mpa | ||
| Tensile strain | ISO 527-2/50 | 6.1 % | |
| ISO 527-2/50 | 130 % | ||
| Nominal tensile fracture strain | ISO 527-2/50 | > 50 % | |
| Flexural modulus | ISO 178 | 2400 Mpa | |
| bending strength | ISO 178 | 100 Mpa | |
| ISO 178 | 74.0 Mpa | ||
| ISO 178 | 7.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 14 kJ/m² | |
| ISO 179/1eA | 70 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| ISO 179/1eU | 无断裂 | ||
| ISO 179/1eU | 无断裂 | ||
| Impact strength of cantilever beam gap | ISO 180/A | 12 kJ/m² | |
| ISO 180/A | 60 kJ/m² | ||
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 70.0 J | |
| ISO 6603-2 | 60.0 J | ||
| Multi axis Instrumented Peak Impact Force | ISO 6603-2 | 6200 N | |
| ISO 6603-2 | 5300 N |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1.0E+16 ohms | |
| Volume resistivity | IEC 60093 | 1.0E+16 ohms·cm |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Drying Temperature - Dry Air Dryer | 120 °C | ||
| Drying time - Dry Air Dryer | 4.0 hr | ||
| Suggested maximum moisture content | < 0.020 % | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the rear of the barrel | 250 to 270 °C | ||
| Temperature in the middle of the barrel | 270 to 290 °C | ||
| Temperature at the front of the material cylinder | 285 to 305 °C | ||
| Spray nozzle temperature | 270 to 305 °C | ||
| Processing (melt) temperature | 280 to 320 °C | ||
| Temperature | 70 to 110 °C | ||
| Back pressure | 10.0 to 20.0 Mpa | ||
| Exhaust hole depth | 0.025 to 0.075 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 134 °C | |
| ISO 75-2/A | 122 °C | ||
| vicat | ISO 306/B50 | 141 °C | |
| ISO 306/B120 | 142 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 6.5E-5 cm/cm/°C | |
| ISO 11359-2 | 6.5E-5 cm/cm/°C | ||
| thermal conductivity | ISO 8302 | 0.20 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top