impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30°C,Compression Molded	ISO 180/A	5.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C,Compression Molded	ISO 180/A	12	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	2.00mm,Compression Molded	ISO 527-2/1BA/50	1050	Mpa
tensile strength	Yield,2.00mm,Compression Molded	ISO 527-2/1BA/50	26.0	Mpa
tensile strength	tensile strength	Break,2.00mm,Compression Molded	ISO 527-2/1BA/50	28.0	Mpa
Tensile strain	Break,2.00mm,Compression Molded	ISO 527-2/1BA/50	>1000	%
Bending modulus	2.00mm,Compression Molded	ISO 178	1250	Mpa
bending strength	2.00mm,Compression Molded	ISO 178	27.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	81.0	°C
Vicat softening temperature		ASTM D15252	127	°C
Melting temperature		DIN 53765	132	°C
EnthalpyChange		DIN 53765	205	J/g
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ISO 1133	0.30	g/10min
	melt mass-flow rate	190°C/21.6kg	ISO 1133	29	g/10min
	melt mass-flow rate	melt mass-flow rate	190°C/5.0kg	ISO 1133	1.5	g/10min
Environmental stress cracking resistance	10%IgepalCO-630,Compression Molded,F50	ASTM D1693B	40.0	hr
density		ISO 1183	0.954	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD,Compression Molded	ISO 868	61
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Blow molding melt temperature			165to215	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top