PC LEXAN™ 244RF-701 SABIC INNOVATIVE NANSHA
147
- Unit Price:US$ 4,013 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10.5MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Food contact compliance｜Medium viscosity｜Good demolding performance｜Flame retardant
- Application Areas:Electrical appliances｜Plastic bag｜Medical supplies｜Nursing supplies
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 70 | |
| ASTM D785 | 118 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ASTM D542 | 1.586 | |
| transmissivity | ASTM D1003 | 88.0 % | |
| Haze ratio | ASTM D1003 | 1.0 % |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | ASTM D648 | 137 °C | |
| ASTM D648 | 132 °C | ||
| vicat | ASTM D15256 | 154 °C | |
| Linear coefficient of thermal expansion | ASTME831 | 6.8E-05 cm/cm/°C | |
| specific heat | ASTMC351 | 1250 J/kg/°C | |
| thermal conductivity | ASTMC177 | 0.27 W/m/K | |
| RTI Elec | UL 746 | 130 °C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI | UL 746 | 130 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 875 °C | |
| Limiting Oxygen Index | ASTM D2863 | 25 % | |
| UL flame retardant rating | UL 94 | V-2 | |
| Burning wire flammability index | IEC 60695-2-12 | 850 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 62.0 Mpa | |
| ASTM D638 | 68.0 Mpa | ||
| elongation | ASTM D638 | 7.0 % | |
| ASTM D638 | 130 % | ||
| flexural modulus | ASTM D790 | 2340 Mpa | |
| bending strength | ASTM D790 | 96.0 Mpa | |
| Taber abraser | ASTM D1044 | 10.0 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D4812 | 3200 J/m | |
| Dart impact | ASTM D3029 | 169 J | |
| Impact strength of cantilever beam gap | ASTM D1822 | 577 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| shrinkage rate | 内部方法 | 0.50-0.70 % | |
| Water absorption rate | ASTM D570 | 0.15 % | |
| ASTM D570 | 0.35 % | ||
| ASTM D570 | 0.58 % | ||
| Specific volume | ASTM D792 | 0.830 cm³/g | |
| melt mass-flow rate | ASTM D1238 | 11 g/10min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D150 | 2.96 | |
| Dissipation Factor | ASTM D150 | 9E-04 | |
| ASTM D150 | 9E-04 | ||
| ASTM D150 | 0.010 | ||
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 2 | |
| High arc combustion index (HAI) | UL 746 | PLC 1 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 2 | |
| Hot wire ignition (HWI) | UL 746 | PLC 2 | |
| volume resistivity | ASTM D257 | >1.0E+17 ohms·cm | |
| dielectric strength | ASTM D149 | 15 KV/mm | |
| dielectric constant | ASTM D150 | 3.17 | |
| ASTM D150 | 3.17 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top