Impact strength of simply supported beam without notch
-30°C
ISO 179/1eU
无断裂
Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
无断裂
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
1.5 mm
UL 94
HB
Burning wire flammability index
IEC 60695-2-12
800 °C
Extreme Oxygen Index
ISO 4589-2
25 %
mechanical properties
Test Condition
Test Method
Test Result
Tensile modulus
23°C
ISO 527-2/1
2450 Mpa
tensile strength
Yield, 23°C
ISO 527-2/50
76.0 Mpa
Tensile strain
Yield, 23°C
ISO 527-2/50
6.9 %
Nominal tensile fracture strain
23°C
ISO 527-2/50
> 50 %
Bending modulus
23°C
ISO 178
2450 Mpa
bending strength
23°C
ISO 178
110 Mpa
injection
Test Condition
Test Method
Test Result
Drying Temperature - Dry Air Dryer
130 °C
Drying time - Dry Air Dryer
2.0 to 4.0 hr
Suggested maximum moisture content
< 0.020 %
Suggested injection volume
30 to 70 %
Temperature at the rear of the barrel
315 to 325 °C
Temperature in the middle of the barrel
320 to 330 °C
Temperature at the front of the material cylinder
325 to 335 °C
Spray nozzle temperature
315 to 340 °C
Processing (melt) temperature
330 to 340 °C
Mold temperature
110 to 150 °C
Back pressure
10.0 to 20.0 Mpa
Exhaust hole depth
0.025 to 0.050 mm
thermal performance
Test Condition
Test Method
Test Result
Hot deformation temperature
0.45 MPa, Unannealed
ISO 75-2/B
191 °C
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/A
172 °C
Vicat softening temperature
ISO 306/B120
202 °C
Linear coefficient of thermal expansion
Flow : 23 to 55°C
ISO 11359-2
6.5E-5 cm/cm/°C
Linear coefficient of thermal expansion
Across Flow : 23 to 55°C
ISO 11359-2
6.5E-5 cm/cm/°C
RTI Elec
UL 746
150 °C
RTI Imp
UL 746
130 °C
RTI
UL 746
150 °C
Physical properties
Test Condition
Test Method
Test Result
density
23°C
ISO 1183
1.13 g/cm³
melt mass-flow rate
330°C/2.16 kg
ISO 1133
8.0 g/10 min
Melt Volume Flow Rate (MVR)
330°C/2.16 kg
ISO 1133
8.00 cm3/10min
Shrinkage rate
横向Flow : 2.00 mm
ISO 294-4
0.90 %
Shrinkage rate
Flow : 2.00 mm
ISO 294-4
0.90 %
Water absorption rate
Saturation, 23°C
ISO 62
0.30 %
Water absorption rate
Equilibrium, 23°C, 50% RH
ISO 62
0.12 %
Electrical performance
Test Condition
Test Method
Test Result
Surface resistivity
IEC 60093
1.0E+16 ohms
Volume resistivity
23°C
IEC 60093
1.0E+17 ohms·cm
Dielectric strength
23°C, 1.00 mm
IEC 60243-1
35 KV/mm
Relative permittivity
23°C, 100 Hz
IEC 60250
2.90
Relative permittivity
23°C, 1 MHz
IEC 60250
2.80
Dissipation factor
23°C, 100 Hz
IEC 60250
1.0E-3
Dissipation factor
23°C, 1 MHz
IEC 60250
9.0E-3
Compared to the anti leakage trace index
Solution A
IEC 60112
V
Compared to the anti leakage trace index
Solution B
IEC 60112
V
hardness
Test Condition
Test Method
Test Result
Ball Pressure Test
ISO 2039-1
130 Mpa
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
