PEI ULTEM™ 1000-7301 SABIC INNOVATIVE US

447

Unit Price:US$ 16,450 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
30MT
Delivery Terms:
FOB
Port of Loading :
Guangzhou port, China
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:Glass fiber reinforced｜Flame retardant｜enhance
Application Areas:Automotive sector｜Electrical field｜Electronic field
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Dart impact	23°C	ASTM D3029	36.0	J
Reverse notch impact	3.20 mm	ASTM D256	1300	J/m
Suspended wall beam without notch impact strength	23°C	ASTM D4812	1300	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.40 mm	UL 94	V-2
	UL flame retardant rating	0.75 mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	5VA
Extreme Oxygen Index		ASTM D2863	47	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	ASTM D1044	10.0	mg
Poisson's ratio		ASTM E132	0.36
bending strength	Yield, 100 mm Span	ASTM D790	165	Mpa
Bending modulus	100 mm Span	ASTM D790	3510	Mpa
elongation	Break	ASTM D638	60	%
elongation	elongation	Yield	ASTM D638	7.0	%
tensile strength	Yield	ASTM D638	110	Mpa
Tensile modulus		ASTM D638	3580	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Processing (melt) temperature			350 to 400	°C
Mold temperature			135 to 165	°C
Back pressure			0.300 to 0.700	Mpa
drying temperature			150	°C
drying time			4.0 to 6.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			330 to 400	°C
Temperature in the middle of the barrel			340 to 400	°C
Temperature at the front of the material cylinder			345 to 400	°C
Spray nozzle temperature			345 to 400	°C
Screw speed			40 to 70	rpm
Exhaust hole depth			0.025 to 0.076	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI		UL 746	170	°C
RTI Imp		UL 746	170	°C
RTI Elec		UL 746	170	°C
thermal conductivity		ASTM C177	0.22	W/m/K
Linear coefficient of thermal expansion	Across Flow : -20 to 150°C	ASTM E831	5.4E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow : -20 to 150°C	ASTM E831	5.6E-5	cm/cm/°C
Vicat softening temperature		ASTM D15254	218	°C
Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	201	°C
Hot deformation temperature	Hot deformation temperature	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	210	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C	ASTM D570	1.3	%
Water absorption rate	Water absorption rate	24 hr	ASTM D570	0.25	%
Shrinkage rate	3.20 mm，Flow	Internal Method	0.50 - 0.70	%
melt mass-flow rate	337°C/6.6 kg	ASTM D1238	9.0	g/10 min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1.0E+17	ohms·cm
Dielectric strength	1.60 mm, in Air	ASTM D149	33	KV/mm
	Dielectric strength	1.60 mm, in Oil	ASTM D149	28	KV/mm
	Dielectric strength	Dielectric strength	3.20 mm, in Oil	ASTM D149	20	KV/mm
Dielectric constant	100 Hz	ASTM D150	3.15
Dielectric constant	Dielectric constant	1 kHz	ASTM D150	3.15
Compared to the anti leakage trace index		UL 746	PLC 4
High arc combustion index		UL 746	PLC 3
Dissipation factor	100 Hz	ASTM D150	1.5E-3
	Dissipation factor	1 kHz	ASTM D150	1.2E-3
	Dissipation factor	Dissipation factor	2.45 GHz	ASTM D150	2.5E-3
Arc resistance		ASTM D495	PLC 5
High voltage arc tracing rate		UL 746	PLC 2
Hot wire ignition		UL 746	PLC 1
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ASTM D785	109

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Other Prices

Supplier	Unit Price
Guangzhou HuShang Chemical	US$ 23930 /MT

Supplier Join

Get App

Top

PEI ULTEM™ 1000-7301 SABIC INNOVATIVE US

Material Description

Technical Data Sheet

Other Prices

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index