PEI ULTEM™ 1000 GN7E6358 SABIC INNOVATIVE US

212

Unit Price:US$ 24,300 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
30MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

For more details, please contact the supplier!

Material Description

Material Properties:Glass fiber reinforced｜Flame retardant｜enhance
Application Areas:Automotive sector｜Electrical field｜Electronic field
Color:--
Grade:Injection grade

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
ball-indentation hardness	H 358/30	ISO 2039-1	140 Mpa

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距	ISO 75-2/Be	200 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距	ISO 75-2/Ae	190 °C
vicat	--	ISO 306/A50	215 °C
	vicat	--	ISO 306/B50	211 °C
	vicat	vicat	--	ISO 306/B120	212 °C
ball-indentation hardness	123 到 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	流动 : 23 到 150°C	ISO 11359-2	5.0E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	横向 : 23 到 150°C	ISO 11359-2	5.0E-5 cm/cm/°C
thermal conductivity		ISO 8302	0.24 W/m/K
RTI Elec		UL 746	170 °C
RTI Imp		UL 746	170 °C
RTI		UL 746	170 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.40 mm	UL 94	V-2
	UL flame retardant rating	0.75 mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	5VA
Burning wire flammability index	3.2 mm	IEC 60695-2-12	960 °C
Limiting Oxygen Index		ISO 4589-2	47 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	6.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	6.0 kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂

Physical properties	Test Condition	Test Method	Test Result
Melt volume flow rate	360°C/5.0 kg	ISO 1133	13.0 cm3/10min
shrinkage rate	Flow	内部方法	0.50 - 0.70 %
Water absorption rate	饱和, 23°C	ISO 62	1.3 %
Water absorption rate	Water absorption rate	平衡, 23°C, 50% RH	ISO 62	0.70 %

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	> 1.0E+15 ohms
volume resistivity		IEC 60093	1.0E+15 ohms·cm
dielectric strength	0.800 mm, 在油中	IEC 60243-1	33 KV/mm
	dielectric strength	1.60 mm, 在油中	IEC 60243-1	25 KV/mm
	dielectric strength	dielectric strength	3.20 mm, 在油中	IEC 60243-1	16 KV/mm
relative permittivity	50 Hz	IEC 60250	2.90
	relative permittivity	60 Hz	IEC 60250	2.90
	relative permittivity	relative permittivity	1 MHz	IEC 60250	2.90
Dissipation Factor	50 Hz	IEC 60250	5.0E-4
	Dissipation Factor	60 Hz	IEC 60250	5.0E-4
		Dissipation Factor	1 MHz	IEC 60250	6.0E-3
		Dissipation Factor	Dissipation Factor	2.45 GHz	IEC 60250	2.5E-3
Compared to the Leakage Tracking Index (CTI)	--	IEC 60112	V
Compared to the Leakage Tracking Index (CTI)	Compared to the Leakage Tracking Index (CTI)	解决方案 B	IEC 60112	V

injection	Test Condition	Test Method	Test Result
drying temperature			150 °C
drying time			4.0 to 6.0 hr
Suggested maximum moisture content			0.020 %
Hopper temperature			80 to 120 °C
Temperature at the rear of the barrel			340 to 395 °C
Temperature in the middle of the barrel			350 to 405 °C
Temperature at the front of the material cylinder			360 to 415 °C
Spray nozzle temperature			350 to 405 °C
Processing (melt) temperature			370 to 410 °C
mold temperature			140 to 180 °C

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1	3200 Mpa
tensile strength	屈服	ISO 527-2/50	105 Mpa
tensile strength	tensile strength	断裂	ISO 527-2/50	85.0 Mpa
Tensile strain	屈服	ISO 527-2/50	6.0 %
Tensile strain	Tensile strain	断裂	ISO 527-2/50	60 %
flexural modulus		ISO 178	3300 Mpa
bending strength		ISO 178	160 Mpa
Taber abraser	1000 Cycles, 1000 g, CS-17 转轮	内部方法	10.0 mg

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top