Material Properties:High temperature resistance｜Weather resistance｜High impact resistance｜Improved impact resistance｜High impact resistance｜Good weather resistance
Application Areas:Fiber grade｜Plastic bag｜Lighting installation｜Plastic bag｜Lighting installation｜Decorative design
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
melt mass-flow rate	ASTM D1238	1.8 g/10min
Shrinkage rate	ASTM D955	0.40-0.80 %
Water absorption rate	ASTM D570	0.40 %
Rockwell hardness	ASTM D785	59

optical performance	Test Method	Test Result
refractive index	ASTM D542	1.490
transmissivity	ASTM D1003	92.0 %
Haze ratio	ASTM D1003	1.4 %
Yellowness Index	ASTM D1925	0.40 YI

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	40.2 Mpa
elongation	ASTM D638	90 %
Flexural modulus	ASTM D790	1780 Mpa
bending strength	ASTM D790	70.6 Mpa
Impact strength of cantilever beam gap	ASTM D256	59 J/m

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	80.0 °C
Linear coefficient of thermal expansion		ASTM D696	0.000070 cm/cm/℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top