impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	12	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	16	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	10	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	14	kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2/1	2400	Mpa
tensile strength	Yield	ISO 527-2/50	65.0	Mpa
tensile strength	tensile strength	Break	ISO 527-2/50	60.0	Mpa
Tensile strain	Yield	ISO 527-2/50	6.5	%
Tensile strain	Tensile strain	Break	ISO 527-2/50	80	%
Bending modulus		ISO 178	2400	Mpa
bending strength		ISO 178	100	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			125	°C
drying time			4.0 to 6.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			270 to 315	°C
Temperature in the middle of the barrel			280 to 325	°C
Temperature at the front of the material cylinder			290 to 335	°C
Spray nozzle temperature			285 to 330	°C
Processing (melt) temperature			290 to 335	°C
Mold temperature			85 to 130	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			40 to 90	rpm
Exhaust hole depth			0.025 to 0.080	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 64.0 mm Span	ISO 75-2/Bf	144	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span	ISO 75-2/Af	132	°C
Vicat softening temperature	--	ISO 306/B50	150	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	152	°C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ISO 11359-2	7.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	7.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	16.0	cm3/10min
Melt Volume Flow Rate (MVR)	Melt Volume Flow Rate (MVR)	330°C/2.16 kg	ISO 1133	70.0	cm3/10min
Shrinkage rate	3.20 mm，Flow	Internal Method	0.60 - 0.90	%
Water absorption rate	Saturation, 23°C	ISO 62	0.30	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.30	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top