PC LEXAN™ HF1140 SABIC INNOVATIVE US
168
- Unit Price:US$ 2,853 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High mobility｜Good demolding performance｜Good forming performance
- Application Areas:chip｜container｜Thin walled products｜Safety equipment｜Optical data storage｜lens
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M 级 | ASTM D785 | 70 |
| R 级 | ASTM D785 | 118 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45 MPa, 未退火, 6.40 mm | ASTM D648 | 137 °C |
| 0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距11 | ISO 75-2/Be | 133 °C | |
| 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 126 °C | |
| 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 126 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距11 | ISO 75-2/Ae | 121 °C | |
| vicat | -- | ISO 306/B50 | 139 °C |
| -- | ISO 306/B120 | 140 °C | |
| ball-indentation hardness | 123 到 127°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | -40 到 95°C，流动 | ASTM E831 | 6.8E-5 cm/cm/°C |
| 23 到 80°C，流动 | ISO 11359-2 | 7.0E-5 cm/cm/°C | |
| specific heat | ASTM C351 | 1250 J/kg/°C | |
| thermal conductivity | -- | ASTM C177 | 0.19 W/m/K |
| -- | ISO 8302 | 0.20 W/m/K | |
| RTI Elec | UL 746 | 130 °C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI | UL 746 | 130 °C |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ASTM D542 | 1.586 | |
| transmissivity | 2540 µm | ASTM D1003 | 88.0 % |
| Haze ratio | 2540 µm | ASTM D1003 | 1.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.1 mm | UL 94 | V-2 |
| Limiting Oxygen Index | ISO 4589-2 | 25 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 10 kJ/m² |
| 23°C | ISO 179/1eA | 12 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 3200 J/m |
| Dart impact | 23°C, Energy at Peak | ASTM D3763 | 54.0 J |
| 23°C | ASTM D3029 | 169 J | |
| Impact strength of cantilever beam gap | ASTM D1822 | 378 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Specific volume | ASTM D792 | 0.830 cm³/g | |
| melt mass-flow rate | 300°C/1.2 kg | ASTM D1238 | 25 g/10 min |
| Melt volume flow rate | 300°C/1.2 kg | ISO 1133 | 23.0 cm3/10min |
| shrinkage rate | 3.20 mm，Flow | 内部方法 | 0.50 - 0.70 % |
| Water absorption rate | 24 hr | ASTM D570 | 0.15 % |
| 平衡, 23°C | ASTM D570 | 0.35 % | |
| 平衡, 100°C | ASTM D570 | 0.58 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| volume resistivity | -- | ASTM D257 | > 1.0E+17 ohms·cm |
| -- | IEC 60093 | > 1.0E+15 ohms·cm | |
| dielectric strength | 3.20 mm, in Air | ASTM D149 | 15 KV/mm |
| 3.20 mm, 在油中 | IEC 60243-1 | 17 KV/mm | |
| dielectric constant | 60 Hz | ASTM D150 | 3.17 |
| 50 kHz | ASTM D150 | 3.17 | |
| 1 MHz | ASTM D150 | 2.96 | |
| 50 Hz | IEC 60250 | 2.70 | |
| 60 Hz | IEC 60250 | 2.70 | |
| 1 MHz | IEC 60250 | 2.70 | |
| Dissipation Factor | 50 Hz | ASTM D150 | 9.0E-4 |
| 60 Hz | ASTM D150 | 9.0E-4 | |
| 1 MHz | ASTM D150 | 0.010 | |
| 50 Hz | IEC 60250 | 1.0E-3 | |
| 60 Hz | IEC 60250 | 1.0E-3 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 2 | |
| High arc combustion index (HAI) | UL 746 | PLC 1 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 2 | |
| Hot wire ignition (HWI) | UL 746 | PLC 2 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 120 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 40 to 60 % | ||
| Temperature at the rear of the barrel | 250 to 270 °C | ||
| Temperature in the middle of the barrel | 260 to 280 °C | ||
| Temperature at the front of the material cylinder | 270 to 295 °C | ||
| Spray nozzle temperature | 265 to 290 °C | ||
| Processing (melt) temperature | 270 to 295 °C | ||
| mold temperature | 70 to 95 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | --2 | ASTM D638 | 2370 Mpa |
| -- | ISO 527-2/1 | 2350 Mpa | |
| tensile strength | 屈服3 | ASTM D638 | 62.0 Mpa |
| 屈服 | ISO 527-2/50 | 63.0 Mpa | |
| 断裂3 | ASTM D638 | 65.0 Mpa | |
| 断裂 | ISO 527-2/50 | 50.0 Mpa | |
| elongation | 屈服3 | ASTM D638 | 6.0 % |
| 屈服 | ISO 527-2/50 | 6.0 % | |
| 断裂3 | ASTM D638 | 120 % | |
| 断裂 | ISO 527-2/50 | 70 % | |
| flexural modulus | 50.0 mm 跨距4 | ASTM D790 | 2300 Mpa |
| --5 | ISO 178 | 2300 Mpa | |
| bending strength | --5,6 | ISO 178 | 90.0 Mpa |
| 屈服, 50.0 mm 跨距4 | ASTM D790 | 93.0 Mpa | |
| Taber abraser | 1000 Cycles, 1000 g, CS-17 转轮 | ASTM D1044 | 10.0 mg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top