Material Properties:Filler: Glass fiber reinforced material｜20% filler by weight
Application Areas:Application in the automotive field｜container
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Water absorption rate		ISO 62	1.0 %
	Water absorption rate		ISO 62	6.6 %
	Water absorption rate	Water absorption rate		ISO 62	2.4 %

flammability	Test Condition	Test Method	Test Result
Burning wire flammability index		IEC 60695-2-12	650 °C
Limiting Oxygen Index		ISO 4589-2	23 %

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2/1A	7400 Mpa
tensile strength	ISO 527-2/1A	150 Mpa
Tensile strain	ISO 527-2	3.3 %
Flexural modulus	ISO 178	6400 Mpa
bending strength	ISO 178	235 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	50 kJ/m²

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	6E+15 ohms
Volume resistivity	IEC 60093	1E+15 ohms·cm
dielectric strength	IEC 60243-1	32 KV/mm
relative permittivity	IEC 60250	3.70
Dissipation Factor	IEC 60250	0.010
Compared to the Leakage Tracking Index (CTI)	IEC 60112	PLC 1

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Af	250 °C
melting temperature		ISO 11357-3	262 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top